Page 1
– and that when you think about purchasing additional audio equipment for your home, car or The JBL Cinema SB200 powered soundbar speaker is a complete, office, you will once again choose JBL products. integrated sound system that will dramatically improve the sound of programs you watch on your television.
SOUNDBAR PLACEMENT 4. After reading the Connections section on page 4, connect all cables to the soundbar. PLACING THE SOUNDBAR ON A TABLE IMPORTANT: Do NOT plug the soundbar’s power cord into an AC If your TV is placed on a table, you can place the soundbar on the table outlet at this time.
Page 4
CONNECTIONS NOTE: If your disc player, cable tuner or satellite tuner does not have an optical digital output, you can connect its analog audio output to your SOURCE CONNECTIONS TV. The TV will send its audio signal to the soundbar through the analog connection described above.
Page 5
BLUETOOTH OPERATION POWER CONNECTIONS After verifying that all of the source connections have been made properly, To wirelessly stream audio to the soundbar from a Bluetooth-enabled plug the supplied power cord into the soundbar’s Power Cord connector, device: and plug the other end into an active, unswitched AC outlet. Do NOT plug this cord into the accessory outlet found on some audio components.
30cm surround-sound experience for anyone sitting in front of and several (12") feet away from the soundbar. Although it is particularly effective when watching movies, you can also try the HARMAN Display Surround setting for music. Remote Surround Mode Button the soundbar’s Volume + button.
SPECIFICATIONS holding the soundbar’s Volume – button. If the programming was successful the soundbar’s Surround button will change from amber CINEMA SB200 POWERED SOUNDBAR SPEAKER to solid white for one second, then will return to flashing amber. Low-frequency transducer: One 3-1/2" (89mm) cone per channel High-frequency transducer: One 1"...