Advertisement

JBL XTREME 2 Manual

What's in the box

What's in the box

Buttons

Buttons

Connections

Connections

Bluetooth®

Bluetooth connection

Bluetooth connection

Music control

Music control

Speakerphone

Speakerphone

Voice assistant

Tap "Voice Assistant" in the JBL Connect app, to make the "" button as the activation key of Siri or Google Now on your phone.
Voice assistant - Step 1 - Tap

Press the "" button on the speaker to activate Siri or Google Now on your phone. Please make sure the Siri or Google Now is enabled on your phone.
Voice assistant - Step 2 - Press button on the speaker to activate Siri or Google Now on your phone

JBL Connect+

Wirelessly links more than 100 pcs JBL Connect+ compatible speakers together.

Step 1
JBL Connect+ Step 1

Step 2
JBL Connect+ Step 2

Play music on one of your JBL speakers and then press the JBL Connect+ button on all desired speakers to start pairing. All the other JBL speakers will play same music from the music source.



Download the JBL Connect app for the following features: stereo setup, firmware upgrade, and device renaming.

JBL Connect+ Step 3


JBL Connect+ Step 4


JBL Connect+ Step 5

LED Behavior

Power
On White On
Stand by White Flash
Bluetooth pairing mode Blue Flash
Bluetooth connected Blue On

Connect+
Broadcasting mode White On

Warning

JBL Xtreme 2 is IPX7 waterproof.


To ensure that the JBL Xtreme 2 is waterproof, please remove all cable connections and tightly close the cap; exposing the JBL Xtreme 2 to liquids without doing so may result in permanent damage to the speaker. And do not expose JBL Xtreme 2 to water while charging, as doing so may result in permanent damage to the speaker or power source. IPX7 waterproof is defined as the speaker can be immersed in water up to 1m for up to 30 minutes.

If the speaker will not be used for a long period of time, please recharge the battery at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.

Specifications

  • Bluetooth® version: 4.2
  • Support: A2DP V1.3, AVRCP V1.6, HFP V1.6, HSP V1.2
  • Transducer: Woofer 2 x 2.75 inch
  • Tweeter: 2 x 20 mm
  • Rated power: 2 x 20W RMS Bi-amp (AC mode)
  • Frequency response: 55Hz–20kHz
  • Signal-to-noise ratio: >80dB
  • Power supply: 19V 3A
  • Battery type: Lithium-ion Polymer 36Wh (Equivalent to 3.7V10000mAh)
  • Battery charge time: 3.5hours
  • Music play time: up to 15 hours (varies by volume level and audio content)
  • USB charge out: 5V / 2A (maximum)
  • Bluetooth® transmitter power: 0-12.5 dBm
  • Bluetooth® transmitter frequency range: 2.402 – 2.480 GHz
  • Bluetooth® transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
  • Dimension (H x W x D): 136 x 288 x 132 mm
  • Weight: 2393g

Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Brand

Videos

JBL XTREME 2 - REVIEW VIDEO

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download JBL XTREME 2 Manual

Advertisement

Need help?

Need help?

Do you have a question about the JBL XTREME 2 and is the answer not in the manual?

Questions and answers

Table of Contents