Power On; Using Your Partybox; Bluetooth Connection - Harman JBL PARTYBOX 710 Owner's Manual

5. POWER ON

Cautions:
– Use the provided power cords only.
1. Connect AC power.
2. Press to power on.
Tip:
– The speaker switches to standby mode automatically after 20
minutes of inactivity. You can press
normal operation.
8 8
2
ON
OFF
1
on the speaker to switch to

6. USING YOUR PARTYBOX

Notes:
– Only one sound source can be played at a time. The priority order
is USB -> BLUETOOTH -> AUX.
– Starting a source with higher priority will always interrupt a source
with lower priority.
– To start a source with lower priority, stop the source with higher
priority first.

6.1 Bluetooth Connection

You can use the speaker with your Bluetooth enabled smartphone
or tablet.
<10 m (33 ft)
1. Press on the speaker to enter Bluetooth pairing mode.
2. Choose "JBL PartyBox 710" on your Bluetooth device to
connect.
3. Once successfully connected, you can stream audio from
your Bluetooth device to this speaker.
Notes:
– This speaker can memorize a maximum of 8 paired devices. The
ninth paired device will replace the first one.
– Enter "0000" if a PIN code is requested for connection to a
Bluetooth device.
– Bluetooth performance can be affected by the distance between
this product and your Bluetooth device and the environment of
operation.
To terminate the Bluetooth-enabled device:
• Turn off this speaker, or
• Disable Bluetooth on your device.
1
2
Bluetooth
Bluetooth
DEVICES
JBL PartyBox 710