Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Harman JBL CINEMA SB580
Summary of Contents for Harman JBL CINEMA SB580
- Page 1 CINEMA SB580 OWNER’S MANUAL...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Verify Line Voltage Before Use The JBL CINEMA BAR SB580 (soundbar and subwoofer) has been designed for use with 100-240 volt, 50/60 Hz AC current. Connection to a line voltage other than that for which your product is intended can create a safety and fire hazard and may damage the unit. -
Page 3: Table Of Contents
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS 8. RESTORE FACTORY SETTINGS 9. RE-CONNECT THE SUBWOOFER 1. INTRODUCTION 2. WHAT’S IN THE BOX 10. PRODUCT SPECIFICATIONS 11. TROUBLESHOOTING 3. PRODUCT OVERVIEW 3.1 Controls and indicators 3.2 Connectors 12. TRADEMARKS 3.3 Subwoofer 3.4 Remote control 4. -
Page 4: Introduction
1. INTRODUCTION Thank you for purchasing the JBL CINEMA BAR SB580 (soundbar and subwoofer) which is designed to bring an extraordinary sound experience to your home entertainment system. We encourage you to take a few minutes to read through this manual, which describes the product and includes step-by-step instructions for setting up and getting started. -
Page 5: What's In The Box
Wall-mounting kit 2. WHAT’S IN THE BOX Unpack the box carefully and ensure that the following parts are included. If any part is damaged or missing, do not use it and contact your retailer or customer service representative. Main unit Product information &... -
Page 6: Product Overview
3.2 Connectors 3. PRODUCT OVERVIEW 3.1 Controls and indicators 1. POWER Connect to power. • (Power) • Connect to the HDMI output on your digital device. • Switch on or to standby. 3. HDMI OUT (TV ARC/TV eARC) 2. –/+ (Volume) •... -
Page 7: Remote Control
3.4 Remote control 5. Playback buttons I/I • Bluetooth source: Skip to the previous or next track. • Bluetooth source: Start or pause playback. 6. Sound effect buttons • Select the pre-defined EQ (equalizer) settings for news. • Select the pre-defined EQ (equalizer) settings for music. •... -
Page 8: Placement
3. As shown in the diagram, remove the fastening screw by 4. PLACEMENT using a screwdriver. 4.1 Desktop placement 4. Fasten the wall-mounting screw included in the supplied mounting kit. Place the soundbar and subwoofer on a flat and stable surface. 5. -
Page 9: Connect
NOTES: 5. CONNECT – To play audio from the digital device connected to your TV, select the TV source (See “6.2 Play from the TV source”). 5.1 Connection with your TV and digital – With the Virtual Dolby Atmos design, the Dolby surround upmixer devices of the soundbar can expand the legacy channel-based audio of Dolby Digital format, including 5.1 and 7.1 content, and provide an... -
Page 10: Bluetooth Connection
“5.2.1 Connect a Bluetooth device”. If the device has ever been paired with the soundbar, first • Bluetooth unpair “JBL CINEMA SB580” on the device. DEVICES NOTES: − The Bluetooth connection will be lost if the distance between the JBL CINEMA SB580 Connected soundbar and Bluetooth device exceeds 10 m / 33 ft. -
Page 11: Play
6.2 Play from the TV source 6. PLAY With the soundbar connected, you can enjoy TV audio from the 6.1 Power-on/Auto standby/Auto wakeup soundbar speakers. P P O O W W E E R R 1. Make sure that your TV is set to support external speakers and the built-in TV speakers are disabled. -
Page 12: Play From The Hdmi In Source
3. Point your TV remote control at the soundbar. Follow the 6.4 Play from the Bluetooth source instructions below: Through Bluetooth, stream audio from your Bluetooth device to a) On the soundbar, hold one of these buttons: +, –, the soundbar. until the status indicator flashes red three times. -
Page 13: Sound Settings
• : sound mode for TV programs such as news and 7. SOUND SETTINGS weather forecasts 7.1 Dolby Atmos (Virtual) → The status indicator slowly flashes red twice ( , if the voice mode is enabled on the soundbar. With the Virtual Dolby Atmos, enjoy height sound effects when you play movies in the HDMI IN / HDMI eARC/ARC source. -
Page 14: Restore Factory Settings
8. RESTORE FACTORY SETTINGS 9. RE-CONNECT THE SUBWOOFER The soundbar and subwoofer are paired at factories. After power- on, they are paired and connected automatically. In some special > 10S cases, you may need to pair them again. 1. Press to switch on. -
Page 15: Product Specifications
Dimensions 10. PRODUCT SPECIFICATIONS • Soundbar dimensions (W x H x D): 950 x 64 x 80 mm / 37.4" x 2.5" x 3.1" General specification: Subwoofer dimensions (W x H x D): • • Model: CINEMA SB580 200 x 404 x 250 mm / 7.9" x 15.9" x 9.9" •... -
Page 16: Troubleshooting
Remote control 11. TROUBLESHOOTING The remote control does not work. Never try to repair the product yourself. If you have problems • Check if the batteries are drained. If so, replace them with using this product, check the following before you request new ones. -
Page 17: Trademarks
® owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. - Page 18 © 2024 HARMAN International Industries, Incorporated. Incorporated 8500 Balboa Boulevard, All rights reserved. Northridge, CA 91329 USA JBL is a trademark of HARMAN International Industries, Incorporated, registered in www.jbl.com the United States and/or other countries. Features, specifications and appearance are subject to change without notice.