Advertisement
FUNCTION TABLE
The functions of the MDF?
are selected by specifying the respective mode and/or job. The following shows mode
and job configuration and gives an outline of the respective functions.
|
Mode and Job
Configuration
Outline
of Mode
and
Job Functions
Save Mode
Load Mod
File Mode
Job Mode
Save Mode
e
JOB 1: FREE DISK (Displays free disk space)
JOB 2: INTERVAL TIME (For interval time setting)
JOB 3: DELETE (Deletes final file)
JOB 4: COPY
(For copying files)
JOB 5: BACK UP (For copying disks)
JOB 6: FORMAT
(Initializes disks)
For explana-
Outline
:
tion see p.
Enables recording ("saving" for storage) of
ó
:
11
external equipment data on disks.
Load Mode
File Mode
Enables loading of data stored on disks to
1
TEN
.
;
15
external equipment in single file units.
Allows selection of file no. (1-19) affixed to
each recording as well as checking of total
number of files.
Lets you select jobs 1~6.
JOB 2:
INTERVAL
TIME
JOB 3:
DELETE
JOB 5:
BACK UP
JOB 6:
FORMAT
Lets you
check the remaining disk memory
space (in ten steps, 0-9).
When
there are several data
messages
within
one file, you can set the time interval between
messages transmitted during loading (data
transmission) in the range 0~1.9 sec.
Enables deletion of the data in the final file
(file with highest number).
Lets
you copy data from any desired
file to
another disk.
Allows
creation
of a back-up
disk,
i.e.
copying of all data files on a disk to another
one.
Lets you initialize disks. Can also be used to
delete al! data files on a disk.
Advertisement
