Advertisement
Storing Data
(Save mode)
3
Press the YES key to obtain the following display:
Press YES...
...to obtain the above blinking display.
4
Press the YES key once more to implement disk initialization (formatting).
When
you press the YES key to
format.....
...the above display is shown.
After
a while,
formatting
is com-
pleted....
i
0
xi
...and the above display appears.
tf the NO key is pressed without pressing the YES key, initialization (formatting)
is not carried out. Instead, the unit enters File mode.
The Save mode is used when you want to store (record) voice data, sequence data,
or other data from external equipment on the disk inserted in the MDF1.
* Output data from external equipment is performed using the so-called bulk dump
function of that unit. For details, please read through the relevant sections of
the owner's manual for that piece of equipment.
* The received data is first stored in a memory
called "input buffer". When the
save command
is executed, the data provisionally stored in this buffer is then
recorded on the disk.
11
Advertisement
