Advertisement
Rear Panel
a ON/SL OFF
*-9--
@ POWER
Switch
Setting this switch to the ON position powers up the unit. At the same time, a
message will appear on the LED display
(9). Please insert and remove disks with
the power turned ON.
( DC IN 10V Terminal
This terminal is for connection of the supplied special AC adapter PA-4.
© MIDI IN Terminal
This is the input terminal for the voice data, sequence data and other MIDI data
you wish to store on a disk. It is connected to devices such as a DX-series synthesizer
or a QX-series sequencer.
@ MIDI OUT Terminal
The MIDI OUT terminal is used to transmit the voice data, sequence data and other
MIDI data stored on a disk to devices such as a DX-series synthesizer or a OX-series
sequencer, etc.
MIDI THRU Terminal
The signal received at the MIDI IN terminal (8) is transmitted from this terminal
without any changes, meaning you can use it to send exactly the same signal as
the one received to another MIDI device. To do so, simply connect this terminal
to the MIDI IN terminal of the other MIDI device.
Advertisement
