Advertisement
* When you wish to copy the data of a single file, refer to page 17, "Copying a
E
File".
1
Press the JOB key to enter Job mode.
|
2
Select job 5. To do so, press
the INC or DEC key until the display alternately
shows "Job" and "5".
3
Press the YES key to obtain the following display.
|
Pressing YES displays...
Then...
Blinks
P
e.
OK?
..the
display
blinks,
showing
the
above symbol.
4
Remove the original disk you wish to back up and insert the back-up disk you
want to copy to.
5
Press the YES key to execute back-up.
Pressing YES displays...
Then...
When
copying is completed...
emm.
New
final file number
of
backed up data
..the
new
final
file number
of the
backed up data is displayed.
If the NO key is pressed instead of the YES key, File mode is entered without carrying
out back-up.
Advertisement
