Advertisement
Copying Disks
(JOB 5: BACK UP)
18
Pressing YES displays...
Then...
When
copying
is completed...
New file number of copied
data
...the new
file number
of the copied
data is displayed as shown
above.
If the NO key is pressed instead of the YES key, File mode is entered without carrying
out copying. The file number displayed in such a case is the file number selected
in step (2). Should you wish to check the total number of files on the disk, please
press the FILE key once more. (See page 14 for details on "Checking the Total
Number of Files".)
Use the job 5 function, Back Up, to copy all data on a disk (The disk you want
to use for back up.) to another disk.
* The disk you want use for back-up must have free memory space sufficient to
accommodate the data volume to be copied. Also note that it is not possible to
use a disk for back-up that has not yet been initialized (formatted) or whose
erasure protection tabs have been broken out.
* If the disk you wish to use for back-up already contains data, the back-up data
will have file numbers following those of the existing data.
Original disk
Back-up disk
1. Data a
2. Data b
Back-up
Advertisement
