Advertisement
Selecting a File
Number (File mode)
Loading Data
(Load mode)
* The unit automatically reverts to File mode after completion or interruption of
save, load or job operations. Please note, however, that the file number displayed
after completion of a load operation (See below.)
or interruption of a copy
operation (page 17) is the file number selected during the respective load or
copy procedure. This is not necessarily identical with the total number of files
on the inserted disk. Also remember:
as long as the power is ON, the display
will continue to show the number of files on the previous disk even after it is
replaced by a different disk.
If you wish to display the total number of files on
the inserted disk in the cases just described, simply press the FILE key again.
When you wish to load data saved on a disk to external equipment, or when you
want to copy the data in a certain file to another disk, it is necessary to first specify
the file number of the data by using the File mode function described below.
1
Press the FILE key to enter File mode.
2
Usethe INC or DEC key in order to display the desired file number. This completes
selection.
Specify number
using INC or DEC.
c
Desired file number
When you want to load (transmit) data stored on a disk to external equipment,
use the Load mode.
* Before actually beginning a load operation, it is necessary to set up the external
equipment so that it can receive data. To perform the required set up, please
consult the owner's manuals for your equipment.
If several large-volume data messages have been consecutively stored in a single
file, errors may occur on the receiving side when a load operation is carried out.
In such cases, it is preferable to set a certain time interval between the data
messages
being transmitted
before actually loading.
(See page 21 for details
on "Setting the Load Time Interval for Multiple Data".)
1
Press the FILE key to enter File mode.
2
Using
the INC or
DEC key, display the number of the file you wish to transmit
(load).
3
Press the LOAD key to execute loading.
Pressing LOAD
displays...
...Which then changes to...
15
Advertisement
