ICP DAS USA I-7188XA Series User Manual page 36

Step 5: The following instructions will guide you through the installation
process.
Step 5.1: Press <ENTER> to start the installation
Step 5.2: Select the drive where the unzipped file is located. The
default is "A", so you should enter "C", then press
<ENTER>.
Step 5.3: Press <ENTER> again. This will install the software from the
directory \tctemp.
Step 5.4: Press <ENTER> again. This allows Turbo C to be installed
on the Hard Drive.
Step 5.5: Use the Up/Down arrow keys (Press the up arrow once) to
select Start Installation, and then press <ENTER> again.
I-7188XA Series User's Manual ( Ver1.2, Feb/2014, 7MH-019-10 ) ---
Select "Start Installation"
36