Safety Characteristic Data - Pilz PNOZ e8.1p Operating Manual

PNOZ e8.1p

Safety characteristic data

Operating EN ISO
mode 13849-1:
2015
PL
SC output
via PLIDdys PL d
SC output
via 2-ch. in-
put circuit PL e
Explanatory notes for the safety-related characteristic data:
}
The SIL CL value in accordance with EN 62061 corresponds to the SIL value in accord-
ance with EN 61508.
}
T is the maximum mission time in accordance with EN ISO 13849-1. The value also ap-
M
plies as the retest interval in accordance with EN 61508-6 and IEC 61511 and as the
proof test interval and mission time in accordance with EN 62061.
All the units used within a safety function must be considered when calculating the safety
characteristic data.
Operating Manual PNOZ e8.1p
1002226-EN-09
NOTICE
You must comply with the safety characteristic data in order to achieve the
required safety level for your plant/machine.
EN ISO EN 62061
13849-1:
SIL CL
2015
Category
Cat. 2 SIL CL 2
Cat. 4 SIL CL 3
INFORMATION
A safety function's SIL/PL values are not identical to the SIL/PL values of
the units that are used and may be different. We recommend that you use
the PAScal software tool to calculate the safety function's SIL/PL values.
EN 62061 IEC 61511
PFH [1/h] SIL
D
8,02E-09 SIL 2
3,44E-09 SIL 3
IEC 61511 EN ISO
13849-1:
PFD
2015
T [year]
M
4,55E-04 20
4,53E-05 20
| 26