Safety Characteristic Data - Pilz P2HZ X4P Operating Manual

P2HZ X4P
Mechanical data
Spring-loaded terminals:
Terminal points per con-
nection
Stripping length with
spring-loaded terminals
Dimensions
Height
Width
Depth
Weight
Where standards are undated, the 2022-09 latest editions shall apply.

Safety characteristic data

Operating EN ISO
mode 13849-1:
2015
PL
– PL e
Explanatory notes for the safety-related characteristic data:
}
Safety characteristic data in accordance with EN IEC 62061 and EN/IEC 61511 was cal-
culated based on EN/IEC 61508.
}
T is the maximum mission time in accordance with EN ISO 13849-1. The value also ap-
M
plies as the retest interval in accordance with EN/IEC 61508-6 and EN/IEC 61511 and as
the proof test interval and mission time in accordance with EN IEC 62061.
All the units used within a safety function must be considered when calculating the safety
characteristic data.
Operating Manual P2HZ X4P
20076-EN-11
777354
–
–
94 mm
22,5 mm
121 mm
215 g
NOTICE
You must comply with the safety characteristic data in order to achieve the
required safety level for your plant/machine.
EN ISO EN IEC
13849-1: 62061
2015
SIL CL/
Category maximum
SIL
Cat. 4 SIL 3
INFORMATION
A safety function's SIL/PL values are not identical to the SIL/PL values of
the units that are used and may be different. We recommend that you use
the PAScal software tool to calculate the safety function's SIL/PL values.
777355
–
–
94 mm
22,5 mm
121 mm
210 g
EN IEC EN/IEC
62061 61511
PFH [1/h] SIL
D
3,01E-09 SIL 3
787355
2
8 mm
101 mm
22,5 mm
121 mm
210 g
EN/IEC EN ISO
61511 13849-1:
2015
PFD
T [year]
M
3,24E-06 20
| 19