Table of Contents
Advertisement
temperature higher than the current ambient air
temperature.
• If the current ambient temperature is lower than
the target temperature, the product operates as
follows:
- The heater inside the product starts working.
- The color of
Z
on the status displays turns red.
• Excessive electricity bills may result if heating is
used for a long time. (Rated power consumption
during heating : 1500W)
• When you stop and restart heating, the product
will start at the last set temperature.
• Heating auto-block function: heating can work
continuously for up to 8 hours, but it turns off
automatically after 8 hours of operation. If you
want to restart it, press the Heating button to
restart heating. If you want to set the duration of
heating to less than 8 hours, you can use the LG
ThinQ Application to set the duration from 1 to 8
hours.
• Residual heat removal function: When you turn
off the power during heating, the residual heat
removal works to get rid of the residual heat
inside the product.
- The color of
Z
on the status displays turns
white.
- Time decreased from 60 seconds ( 60
~
58.......2
~
1
~
- After displaying up to 0, the product is off
• During heating, there may be an odor from the
heat generated in the air outlet. Rest assured
that the odor will naturally disperse over time.
• Rest assured that the following types of noise
are not a sign of a malfunction:
- Noises that sound like 'tick', 'click', or 'pop' may
be generated from contraction and expansion
due to temperature differences in the plastic.
- Noises that sound like 'clang', 'ting', or 'clank'
may be generated from contraction and
expansion due to the temperature differences
in the heater.
- Noises that sound like 'clunk' or 'phut' may be
generated by the heater switch operating
during heating.
~
59
0)
Using the Extra Functions
Setting the Sleep Timer
Set the timer so that operation stops automatically
after the product has operated for a specific time.
• Press the Sleep Timer button during operation
to set the Sleep Timer in the order of 1H(Turn off
1 Hour Later) ~ 12H(Turn off 12 Hours Later)
~
OF(Cancel)
NOTE
• When the sleep timer is set, the product will
operate with level 1 for display brightness and
rotation stops. (However, if the display
brightness is set to Off before the sleep timer is
set, the screen brightness will remain OFF.)
• When the sleep timer is set, the fan speed will be
adjusted to Sleep which is the lowest fan speed,
and after a set period of time, the fan speed will
be adjusted automatically according to the air
quality. (Noise levels may change according to
the fan speed.)
• You can change the fan speed, display
brightness, and rotation even while the sleep
timer is set.
• When the sleep timer is set, press the Sleep
Timer button on the remote controller once
again to cancel the sleep timer.
Setting the Standby Screen
It displays a variety of indoor air information.
• Press the Information Display button on the
remote controller to set the desired standby
screen in the order of Air Quality
OPERATION
25
PM10
~
~
Advertisement
Chapters
Table of Contents
