Table of Contents
Advertisement
Playing a Tape
In this section, we will explain some operations and
functions relating to tape playback.
Basic Playback
1 Insert a cassette.
2 Turn on the TV.
3 If your TV is equipped with video/audio input jacks
Select the input for the VCR.
If your TV is not equipped with video/audio input
jacks
Select the channel for the VCR (3 or 4).
4 Press » PLAY.
<eee HIGH SPEED
REWIND
To stop playback
Press @ STOP.
To advance the tape rapidly
Press p> FF.
To rewind the tape
Press «« REW.
4
To rewind the tape at high speed
a FE
Press «ea HIGH SPEED REWIND.
@ STOP
To get a sharper picture
Turn the SHARPNESS control toward SHARP.
To get a softer picture
Turn the SHARPNESS control toward SOFT.
When the tape is played back to the end
The tape is automatically rewound to the beginning
(auto rewind). The power remains on.
About the Data Screen
To erase the data screen from the screen, press DATA
Data Screen
SCREEN on the Commander.
Press again to resume it.
Notes on the Remaining Tape Length Indicator
The displayed remaining tape length is not precise.
Tape operation
Therefore, use it only as an approximate reference.
mode
When you insert a short tape such as T-20, T-30 ora
nonstandarized commercially available tape, this
indicator may not function correctly.
30
Remaining
tape length
Linear time
counter
Tape speed
Advertisement
Table of Contents
