Table of Contents
Advertisement
Timer Recording
To Cancel or Change the Timer Settings
Problems When TIMER REC ON/OFF is Pressed
The safety tab of the inserted
cassette has been broken off.
¢No cassette has been
inserted.
¢The tape is at its end.
*No program is set.
The cassette is ejected
automatically.
The TIMER indicator
does not appear.
information about timer recording
eWhen the recording is completed, the memory of the
program will be erased if it is for only one day.
elf the tape reaches at its end before the turn-off time,
recording will stop and the power will turn off.
If a power-interruption occurs
lf a power interruption lasting less than approximately 3
hours occurs while the VCR is waiting for a preset time,
the VCR will enter the standby mode for timer recording
again. (If a power interruption lasting more than
approximately 3 hours occurs before a timer recording
the memory will be cleared. Reset the date and time,
then preset the date for the timer recording again.)
elf a power interruption lasting less than approximately 3
hours occurs during a timer recording, the VCR will start
recording again but the tape counter will indicate
"OHOOMOOS."
50
You can also cancel or change the timer settings on the
TV screen.
First, display the TIMER SET/CHECK display. Then select
the program and cancel or change it.
Use A and V to move cursor.
Use » and < to blink items.
Advertisement
Table of Contents
