Table of Contents
Advertisement
Alternative 2:
Adopt the value!
P
V
Press
"i/reset" to go back to the modification mode.
The set value will be adopted.
Note:
To detect display errors, the value appears shifted by one posi-
tion to the right.
Display: Value 3.822
P
V
On to next parameter
Goes back to the previous
parameter
Calibration and operation
/reset
Fig. 127
h
min s
%
Fig. 128
ESC
Fig. 129
h min s
%
Fig. 130
Fig. 131
6.8.2
Parameters without index, without direct
display
Example of parameter 224 (air pressure switch specified
time) on the Parameters level
P
Press
for the specified time for the air pressure signal.
Display: Parameter 224: blinks, characters ._._ do not.
P
Press
"i/reset" for the modification mode.
Display: 48.510.
Press
or
to change the time previously set by one posi-
tion to the left.
Display: The specified time 48.510 blinks.
Note
To detect display errors, the value appears shifted by one posi-
tion to the left.
45
GB
V
h
min s
%
/reset
V
h
min s
%
P
V
h min s
Fig. 132
Fig. 133
Fig. 134
%
Fig. 135
20160576
Advertisement
Table of Contents
