Table of Contents
Advertisement
6.6.1
Displaying the Service values
Error history
See Parameter with index, with or without direct display/Example
of parameter 701: Error history
Note:
They can be cancelled for assistance (see Parameter list page)!
Mains voltage
P
Parameter 951 is displayed: blinking.
The mains voltage is displayed on the right.
Example: 951: 120
On to next parameter
Goes back to the previous
parameter
Flame intensity
P
The display shows the parameter 954: blinking.
On the right, the flame intensity is displayed in a percentage
from 0 to 100%.
Example: 954: 0
End of the Service level – End –
Goes back to the previous
parameter
20160576
Calibration and operation
V
h min s
%
V
h min s
%
End of the Service level
P
When this page appears you have reached the end of the Service
level.
The display shows – End – blinking.
Fig. 70
At the start of the Service level
At the end of the Service level
ESC
Fig. 71
ESC
Press
The display shows OPErAtE.
Fig. 72
When this screen appears you return to the normal display and
you can pass to the successive level mode.
Fig. 73
38
GB
V
h
min s
P
V
h
to return to standby mode.
P
h
min s
V
%
%
Fig. 74
Fig. 75
min s
%
Fig. 76
Fig. 77
Advertisement
Table of Contents
