Table of Contents
Advertisement
Press
"i/reset" to start up the backup process.
The display shows run.
<3 s
After about 3 seconds (depending on the duration of the program
sequence), the display shows bAC End to indicate the end of the
backup process.
Display: bAC End.
It will be displayed for 2 minutes, or it can be ended by pressing
the key
"i/reset".
<2
min
/reset
The displays shows OFF when the backup process has finished.
Note:
During the backup, all the parameter settings are
transferred from the unit's memory to the memory
WARNING
of the program module (PME).
If the parameters need to be changed, a back-
up copy must be made!
Otherwise there is the risk of losing the safety
functions.
20160576
Calibration and operation
/reset
Fig. 100
Fig. 101
Fig. 102
Fig. 103
Fig. 104
6.7.3
Restore
The parameter 000: blinks.
Display: Parameter 000: blinks, the display Int does not blink.
Press
"i/reset" for the group of parameters 041.
Display: Parameter 041: blinks, the display ._._ does not blink.
Press
for the parameter 060.
Display: Parameter 060: blinks, the index 00: and the value 0 do
not blink.
Press
"i/reset" for the parameter rEStorE.
Display: The parameter rEStorE blinks.
42
GB
Fig. 105
/reset
Fig. 106
Fig. 107
Fig. 108
/reset
Fig. 109
Fig. 110
Advertisement
Table of Contents
