Speakers; Removing The Speakers - Dell NOT22427 Owner's Manual

Steps
1. Align the screw holes on the assembly-inner frame with the screw holes on the system board and the palm-rest assembly.
2. Replace the twelve screws (M2x3) that secure the assembly-inner frame to the palm-rest assembly.
3. Connect the speaker cable to the system board.
4. Route the speaker cables through the routing guides on the palm-rest assembly.
5. Route the antenna cables through the routing guides on the palm-rest assembly.
Next steps
1. Install the WLAN card.
2. Install the 4G WWAN card
3. Install the battery.
4. Install the base cover.
5. Install the SIM card.
6. Follow the procedure in

Speakers

Removing the speakers

CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the SIM card.
3. Remove the base cover.
76 Removing and installing Field Replaceable Units (FRUs)
or 5G WWAN card, as applicable.
After working inside your
Before working inside your
computer.
computer.