Table of Contents
Advertisement
TO CHECK THE START/END TIME
1) Press POWER button so that the REC indicator goes
off.
2) Press MENU button on the remote control.
3) Confirm "TIMER PROGRAMMING" is pointed.
4) Press F.FWD/^ button. The details of programs ap¬
pear on the TV screen.
5) Press MENU button. The TV screen returns to the
TV mode.
HINTS:
• Make sure the channel you want to record is properly
set in advance.
• It is not necessary to press RECORD button for timer
recording.
• Recording begins automatically at the set of the Start
time.
• if you are recording using a Timer mode, you may
not operate the unit manually.
• The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
• If the erasure protection tab is removed, the cassette
will be ejected when the POWER button is pressed
to off.
• If the tape runs out before the end time, the TV/VCR
will switch to the Stop mode immediately, and the
tape will be ejected.
AUTO RETURN
With this feature, after finished timer recording, the be¬
ginning of the recorded program(s) can be searched
automatically.
1
Select "USER S SET UP"
Press MENU button.
Press PLAY/A or STOP/T but¬
ton repeatedly to point to
"USER'S SET UP".
And press F.FWD/^ button.
3
Auto Return will begin
When all the timer recordings are completed, the
TV/VCR will rewind to the beginning of the recorded
program(s).
NOTES:
• If you press POWER button during rewinding a tape,
the Auto Return will be stopped.
• The Counter Memory function does not operate in
this mode.
4 Watch the recorded program
Press PLAY button.
SLEEP TIMER
The Sleep Timer function make the TV/VCR turn off
without using the POWER button after a desired time
period.
Press SLEEP button on the re¬
mote control repeatedly until
your desired sleep time appears.
Each additional push will in¬
crease the time by 30 minutes. It
is set up to 120 minutes.
TO CANCEL THE SLEEP TIMER
Press SLEEP button repeatedly until "SLEEP 0 MIN¬
UTE" appears.
2
Set "AUTO RETURN" to [ON]
Press PLAY/A or STOP/V button repeatedly to point
to "AUTO RETURN".
Press F.FWD>- orREW/-* but¬
ton repeatedly until [ON] ap¬
pears.
- 26 -
EN
6L24
Advertisement
Table of Contents
