Installing The Batteries; External Input Mode - FUNAI F19TRG1 Owner's Manual

19-inch color tv/vcr
Hide thumbs Also See for F19TRG1:
Table of Contents

Advertisement

CABLE WITHCONVERTER/DESCRAM
-
BEER BOX OR SATELLITE BOX
INSTALLING THE BATTERIES
If your cable service supplies you with a converter box
or if you use a satellite system, you can use the basic
connection shown here.
With this connection you can record and view any chan¬
nel including scrambled channels. However, channel se¬
lection must be made with the converter box. This means
that channels cannot be changed using the TV/VCR Re¬
mote Control. Unattended recording is limited to one
channel at a time.
1) Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery com¬
partment in the direction indicated by the polarity
(+/-) markings.
3) Replace the cover.
EXTERNAL INPUT MODE
When using an external input signal (another VCR or
camcorder), connect the player's audio/video output ca¬
bles to the AUDIO IN,
VIDEO l.N jacks of your
TV/VCR.
Then
press
CHANNEL ▲ or ▼ button or
enter "00" with number but¬
ton so that" AUX" appears on
the screen.
AUX
TO RECORD AND VIEW A SCRAMBLED/UN-
SCRAMULED CHANNEL
1. Set the TV/VCR channel selector to the output chan¬
nel of the cable converter box or satellite box. (Ex.
CH3)
2. Select the channel to be recorded or viewed on the
cable converter box or satellite box.
-
11
-
EN
61.24

Advertisement

Table of Contents
loading

Table of Contents