Table of Contents
Advertisement
5 Set start hour
Press PLAY/A or STOP/T but-
ton repeatedly until your desired
s'"" *
hour appears. (Example: " 7,
::
t:
PM" for 7:30PM)
And press F.FWD/^ button.
6
Set start minute
_
Press PLAY/A or STOP/T but-
„
8M1 ei
ton repeatedly until your desired
;;
:::
::
minute appears. (Example: "30"
►»
for 7:30PM)
And press F.FWD/^ button.
7
Set end hour
-TIMfH nnOQOAUMTO-
N
C" OVI
u®
Press PI .AY/A or STOP/T but¬
ton repeatedly until your desired
►.>_ >« m
hour appears.
(Example: "8,
PM" for 8:50PM)
l.
~
And press F.FWD/^ button.
Set end minute
- men onorvuvMMrt -
Press PI.AY/A or STOP/T but-
:: £
::: ~
ton repeatedly until your desired
minutc appears. (Example: "50"
for 8:50PM)
And press P'.FWI)/^ button.
9
Set the tape speed
Press PLAY/A or STOP/T but¬
ton repeatedly until your desired
tape speed appears. (Example:
LP)
10
Finish setting the program
Press F.FWD/>- or REW/^ button. Program 4 is now
completed.
To set another program, repeat steps [21 to [ 10].
11
Set the timer
Press POWER button to set automatic timer recording.
The TIMER REC indicator lights up.
• You must turn off the TV/VCR to activate automatic
timer recording.
If power is not turned off and you continue watching
TV, "TIMER REC STANDBY" starts flashing on
the TV screen 2 minutes before the programmed start
time.
TO CORRECT A PROGRAM
• While setting a program; press REW/^ button to
go back one step, and enter correct numbers using
PLAY/A or STOP/T button.
• After setting a program;
1) Press POWER button.
2) Repeat steps [1] - [2].
3) Press F.FWB/^ button repeatedly (or press
REW/^ button to go back one step) until a digit
you want to correct flashes and make changes.
4) Press POWER button to set automatic timer re¬
cording.
TO CANCEL AN AUTOMATIC TIMER
RECORDING
• W hile setting or after setting a program;
1) Press POWF.R button.
2) Repeat steps [IJ - |2] and select a program you
want to cancel.
3) Press T-PROG. CLEAR button.
4) Press MENU button to return to the TV mode.
• W'hile recording is in progress;
1) Press POWER button.
2) Press STOP/EJECT button on the TV/VCR.
If you press POWER button to turn off before the end
time, timer recording will continued. Repeat steps 11]
- [2], select a program you want to cancel and press
T-PROG. CLEAR button. Press MENU button to re¬
turn to the TV mode.
-25-
EN
6L24
Advertisement
Table of Contents
