TIMER
AUTOMATIC TIMER
RECORDING
You may set the TV/VCR to record while you are away.
You can set 8 programs to record on a specific day, daily
or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE:
MAY 6th. 1997
SETTING TIME:
CHANNEL:
TAPE SPEED:
from 7:30PM to 8:50PM
CH61
LP
NOTES:
• You must use the remote control for this procedure.
• If a cable box or satellite box is connected with the
TV/VCR you will be limited to record only one chan¬
nel. And the channel selector on the TV/VCR must
be selected to the output channel of the boxes 3 or 4
and then the actual channel to be recorded must be
selected on the boxes.
Make sure...
•
Be sure the clock is set to the correct time and date
before setting the timer.
• Power must be turn on to set automatic timer record¬
ing.
• Insert a cassette tape with its erase prevention tab in
place. (If necessary, rewind or fast forward the tape
to the point at which you want to begin recording.)
• The channel you want to record is properly set in
advance.
Avoid over lap of programs...
There is a case that a program will not be performed.
when programs overlap;
• The program that the start time is set earlier has pri¬
ority.
• When the earliest program has finished and the pro¬
grams which should start still overlap, the recording
will start in order of the program number.
• If you programmed as the illustration, the timer re¬
cording would be carried out as follows (shaded part
is the carried period):
9:00AM - IO:OOAMfor PROGRAM 2
10:00AM -
for PROGRAM 1
Program 1
j
Program 2
[
Program 3
j
9:00AM
1 Select 'TIMER PROGRAMMING
Press MENU button.
Confirm "TIMER PROGRAM¬
MING" is pointed.
And press F.FWDJ^ button.
• If you did not set the clock,
"MANUAL CLOCK SET¬
TING" appears. If so, follow
page 15 to set the clock and repeat from step [3].
2
Select your desired program number (1-8)
Press PLAY/A or STOP/T but¬
ton repeatedly to select your de¬
sired program.
And press F.FWD/^ button.
3
Set the channel number
Press PLAY/A or STOP/T but¬
ton repeatedly until your desired
channel number appears. (Ex¬
ample: CH61)
And press F.FWD/^ button.
TIMER PROGRAMMING
Oi WTF
SMUT FM>
l" *.
"J
TIMER PROGRAM MWG
(H MTF
SMUT FVD
I* * +.
r?;:
::: :::
-MtNII-
►
TMEH PHCGKAMMIKG
PICTURE CONTROL
SETTING CLOCK
CHANNEL SETUP
USER'S SET UP
LANGUAGE [ENGLISH]
CAPTION tCAPTONI]
TME SEARCH
V,_
/
4
Select once, every day or weekly recording
For once recording:
Press PI.AY/A (up) button
repeatedly until your desired
date appears.
(Example:
"5/06" for May 6lh) And press
F.FWD/^ button.
For every day recording
: To record a TV program at
the same lime on the same channel every day.
(
Example:
Monday through Sunday)
Press STOP/T (down) button
repeatedly until "EVERY
DAY" appears.
And press F.FWD/^ button.
- timer PROGRAMMING¬
S' OATl
START EM)
TiCix:/;:: "
EVERY M' ■*
/L) .'v
:::
-RURR PROGRAMMER.
OI UME
START CRD
:::
For weekly recording
: Tv record a TV program at the
same rime on the same channel every week. (Example:
every Monday on channel 7 at 5:00PM)
Press STOP/T (down) button
repeatedly until "EVERY"
and your desired day of the
week appear together.
And press F.FWD/^ button.
- TIMER PROGRAMMING -
CM QATE
START END
y£3
t
> :
::: ::
SVERTMJM
-
::: ::
-24
EN
6L24