Table of Contents
Advertisement
RECORDING
Make sure ...
•
Power must be turned on.
• Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the
point at which you want to begin recording.)
NORMAL RECORDING
You can only watch the same TV program that is being
recorded.
1
Select
the channel to be recorded
Press number buttons on the re¬
mote control or the CH ▼ or ▲
button.
2
Select the tape speed
Press SPF.F.D button to select the
desired tape speed (SP/LP/ SI .P).
3 Begin recording
Press RECORD button. The
RFC indicator flashes.
SKIPPING SOME MATERIALS
DURING RECORDING
Press PAUSE/STILL button to
temporarily stop recording. The
REC indicator flashes.
Press PAUSE/STILL or RE¬
CORD button to resume record¬
ing.
NOTES:
• To prevent tape damage, after five minutes, the
TV/VCR will automatically return to the Recording
mode.
• When in the Pause/Still mode, a display showing 5
"I" marks will appear on the screen. Each "I" mark
represents one minute of Pause time. You may refer
to this display for remaining pause time available.
• If "CLOSED CAP TION ION]" is selected from the
"CLOSED CAPTION SETUP" menu, the On Screen
Display will appear for 5 seconds, then disappear.
If you want to check the remaining pause time avail¬
able using the On Screen Display, press DISPLAY
button. The On Screen Display will appear for 5 sec¬
onds.
4 Stop recording
Press STOP button when recording is completed.
-22-
EN
6L24
Advertisement
Table of Contents
