FUNAI F19TRG1 Owner's Manual page 15

MANUAL CLOCK SETTING
Make sure ...
• You must use the remote control for the following
steps.
• Power must be turned on.
In the example below, the clock is to be set to:
DATE March 1st, 1997
SETTING TIME 5:40PM
1
Select "SETTING CLOCK"
Press MENU button.
Press PLAY/A or STOP/Y but¬
ton repeatedly to point to "SET¬
TING CLOCK".
Then, press F.P'WD^ button.
b
Select the hour
- MANUAL CLOCK SET
u
E N U -
Press PLAY/A or STOP/Y but¬
MONTH OAV YEAR
timer onoonauMP*3
PICTURE COWTOCX
ton repeatedly until your desired
03 /0' SAT 1997
►
SETT** CLOCK
CHAMAL SET U*>
USER'S SET UR
hour appears. (Example: 5. PM)
W TF*
LANQUAOE (ENOL C»t)
caption
torn
TIME SEARCH
. J
Then, press F.FWD/^ button.
miOimm —PM —
"l* 'i'
2
Select "MANUAL CLOCK SET"
Press PLAY/A or STOP/Y but¬
ton repeatedly to point to "MAN¬
UAL CLOCK SET".
Then, press F.FWD/^ button.
3
Select the month
Press PLAY/A or STOP/Y but¬
ton repeatedly until your desired
month appears. (Example: "03"
for March)
Then, press F.FWD/^ button.
7 Select the minute
Press PLAY/A or STOP/Y but¬
ton repeatedly until the desired
minute appears. (Example: 40)
8
Start the clock
Press MENU button.
Allhough seconds are not dis¬
played, they begin counting from
00 when you press MENU but¬
ton. Use this feature to synchro¬
nize the clock with the correct time.
• This unit has a built in calendar up to the year 2010.
4
Select the day _
Press PLAY/A or STOP/Y but
ton repeatedly until your desired u5m"%Y5^ ,f'"
day appears. (Example: "01" for
. , HOUR UINUTE
1st)
Then, press F.FWD/^ button. ^-
5 Select the year
Press PLAY/A or STOP/Y but¬
ton repeatedly until your desired
year appears. (Example: 1997)
Then, press F.FWD> button.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1) Follow steps [1J and [3].
2) Select a digit you want to change using F.FWD/^ or
REW/-^ button.
3) Enter correct numbers using PLAY/A or STOP/Y
button.
4) Press MENU button to start the clock.
-
15
-
EN
61.13