Advertisement
DICING KIT
The dicing kit comes with 2
corresponding Disc and Grids
• 8mm
• 16mm
Assemble in the order shown in the
diagram on the right.
1. Place dicing gearbox into the main
processing bowl.
2. Place dicing distributor on to the
dicing gearbox.
3. Carefully align and place the dicing
grid into the top of the Bowl and
rotate the grid until it drops into
place in the bowl and prevents
further rotation.
4. Dicing Disc can now be located
onto the top of the dicing gearbox
protruding from the centre of
the grid.
5. Align the lid and ensure it is properly
closed and ready for use. The dicing
kit also comes with a peeler which
can be used with the main spindle
and bowl.
IMPORTANT: Always remember to place
the dicing gearbox with dicing distributor,
dicing grid and dicing disc into the food
processor before adding the food.
Do not dice more than the indicated
MAX level at any one time. Exceeding
this capacity will lead to the produce
jamming in the disc. It will also make
the cleaning process of the dicing grid
challenging, and may cause damage to
the accessories in use.
14
Small Feed
Chute
Medium
Feed Chute
Large Feed
Chute
Lid
Dicing Disc
Dicing Grid
Dicing
Distributor
Dicing
gearbox
Processing
Bowl
Motor Base
Advertisement
