Event Notification - Grandstream Networks GSC3510 Series User Manual

The IP address or URL for the Target Host of the Traceroute.
Target Host Press Start to send traceroute request to configured target host.
Press Stop to end traceroute running process.
Ping
The IP address or URL for the Target Host of the Ping.
Target Host Press Start to send traceroute request to configured target host.
Press Stop to end traceroute running process.
NSLookup
Enter a host name and find out the corresponding IP address. It will also do reverse name lookup and find the host name for an IP
Hostname
address you specify.

Event Notification

Set the URL for events on phone web GUI, and when the corresponding event occurs on the device, the device will send the configured URL to SIP server.
The dynamic variables in the URL will be replaced by the actual values of the device before sending to SIP server, in order to achieve the purpose of
events notification. Here are the standards:
1. The IP address of the SIP server needs to be added at the beginning and separate the dynamic variables with a "/".
2. The dynamic variables need to have a "$" at the beginning. For example: local=$local
3. If users need to add multiple dynamic variables in the same event, users could use "&" to connect with different dynamic variables. For example:
192.168.40.207/mac=$mac&local=$local
4. When the corresponding event occurs on the device, the device will send the MAC address and phone number to server address 192.168.40.207.
On Boot Completed
Incoming Call
Outgoing Call
Missed Call
On Connected
On Disconnected
Forward On
Forward Off
On Blind Transfer
On Attended Transfer
Log On
Log Off
Configures the event URL when phone boots up.
Configures the event URL when phone has an incoming call.
Configures the event URL when phone has an outgoing call. (Available for GSC3510 only)
Configures the event URL when the device has new a missed call.
Configures the event URL when a call is established.
Configures the event URL when a call is disconnected.
Configures the event URL when the forward feature is enabled on the device.
Configures the event URL when the forward feature is disabled on the device.
Configures the event URL when users transfer a call with blind transfer on the device.
Configures the event URL when users transfer a call with attended transfer on the device.
Configures the event URL when users log on the device successfully.
Configures the event URL when users log off the device.