Openvpn® Settings - Grandstream Networks GSC3510 Series User Manual

Add Network
ESSID Configures the hidden ESSID name.
Defines the security mode used for the wireless network when the SSID is hidden. Default is "None". Users can choose:
WEP, WPA/WPA2 PSK or 802.1x EAP.
Security Mode for
Hidden SSID
Password Configures the hidden ESSID password.
Advanced Settings
Assigns the priority value of the Layer 2 QoS packets for Wi-Fi.
Layer 2 QoS 802.1p
Priority Value (Wi-Fi)
The Default value is 0.
Configures Wi-Fi country code.
Country Code The default value is "United States of America".
Note: Reboot is requested to take effect.
OpenVPN® Settings
OpenVPN ®
Settings
This enables/disables OpenVPN® functionality, and requires the user to have access to an OpenVPN® server. The default
setting is No.
Enable OpenVPN®
Note: To use OpenVPN® functionalities, users must enable OpenVPN® and configure all of the settings related to OpenVPN®,
including server address, port, OpenVPN® CA, certificate and key.
Enable OpenVPN® Configures enable/disable the LZO compression. When the LZO Compression is enabled on the OpenVPN® server, you must
Comp-lzo turn on it at the same time. Otherwise, the network will fail to connect.
OpenVPN® Server
The URL/IP address for the OpenVPN® server.
Address
WEP: user needs to configure the hidden ESSID password.
WPA/WPA2: user needs to configure the hidden ESSID password.
WPA Enterprise:
EAP Method: EAP mode for 802.1x authorization, user can choose: PEAP, TLS, TTLS or PWD.
CA Certificate Access Mode: Only when EAP Method is PEAP or TLS. Select the way to obtain CA certificate by
this device, fill in the certificate content or obtain it remotely according to the server address.
CA Certificate: Allows to add the EAP CA certificate for 802.1x authorization when CA Certificate mode is selected.
Remote Access to CA Certificate: Enter the path and file name of the server where the CA certificate for the
provisioning, when Remote Access to CA Certificate mode is selected.
User Certificate Access Mode: Only when EAP Method is TLS. Select the way to obtain user certificate by this
device, fill in the certificate content or obtain it remotely according to the server address.
User Certificate: Allows to add the EAP CA certificate for 802.1x authorization when User Certificate mode is
selected.
Remote Access to User Certificate: Enter the path and file name of the server where the user certificate is stored,
when Remote Access to CA Certificate mode is selected
Identity: EAP Identity for 802.1x authorization