Security Settings - Grandstream Networks GSC3510 Series User Manual

Specifies the local time zone for the phone. It covers the global time zones and user can selected the specific one from the
Time Zone
drop-down list.
Time Display Format Specifies which format will be used to display the time. It can be selected from 12-hour and 24-hour format.
Determines which format will be used to display the date.
It can be selected from the drop-down list.
Date Display Format
The default setting is MM/DD/YYYY

Security Settings

Web/SSH Access
Enable SSH
Allow web page access
SSH Port
Access Method
Port
User Login Timeout
User Info Management
Current Admin Password
New Admin Password
Confirm Admin Password
New User Password
Confirm New User Password
Encryption Settings
TLS
Normal (YYYY/M/D)
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
Enables/disables SSH access to the device. The default setting is "Yes".
Allow web page access, If set to "NO", the Web UI will not be accessible. Please turn it on carefully. The setting requires
reboot to take effect. Enabled by Default.
Customizes the SSH port. By default, SSH uses port 22.
Determines which protocol will be used to access the device 's Web GUI. It can be selected from HTTP and HTTPS. The
default setting is HTTP.
Specifies which port to use to access the Web UI. By default, if HTTP, the port number will be 80; if HTTPS is selected, the
port number will be 443.
Configures login timeout (in minutes) for the user. If there is no activity within the specified time, the user will be logged out,
and the Web UI will go to the login page automatically.
Enter current logged-in user's password. This field is case-sensitive. The default password can be found on the sticker on the
back of the device.
Note: Admin username is "admin".
Allows the user to change the admin password. The password field is purposely blank after clicking the "Save" button for
security purpose. This field is case sensitive with a maximum length of 32 characters.
Enter the new Admin password again to confirm.
Allows the administrator to set the password for user-level web GUI access. This field is case sensitive with a maximum length
of 32 characters. The default password is "123".
Enter the new User password again to confirm.