Recording: If selected, GSC3510/GSC3505 will record audio using built-in microphones. Recorded files can be found under Applications
Recording
Note
Up to 7 different Alarm Schedule/Linkage function can be configured in the GSC3510/GSC3505.the list of schedules and linkage functions will be shown in the
lower section of the page (as shown in figure Figure 27: Sensor Setting – Trigger time), users can edit or delete the Alarm schedule by clicking on Edit or
Delete buttons respectively.
GSC3510/GSC3505 WEB GUI SETTINGS
The GSC3510/GSC3505 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow users to configure the
application phone through a Web browser such as Microsoft's IE, Mozilla ,Firefox, Google Chrome and etc.
Status Page Definitions
Account Status
Account
Number
SIP Server
Status
Network Status
MAC
Global unique ID of device, in HEX format. The MAC address will be used for provisioning and can be found on the label coming with
Address
original box and on the label located on the back of the device.
NAT Type
Type of NAT connection used by the device.
Configured address type:
Address
Type
DHCP, Static IP or PPPoE.
IPv4 Address
IP address of the device.
Subnet Mask
Subnet mask of the device.
Default
Default gateway of the device.
Gateway
Figure 29: Sensor Setting – Linkage Function – Make Call
16 SIP accounts on the device.
SIP User ID for the account.
URL or IP address, and port of the SIP server.
Registration status for the SIP account.