Table of Contents
Advertisement
When the time has elapsed
An audible signal sounds. "Timer elapsed" appears in
the display. Use the
0
signal early.
Cancelling the timer duration
Press the
button to open the time-setting options
0
menu and turn the time back. Press the
close the menu.
Changing the timer duration
Use the
button to open the time-setting options
0
menu and change the timer duration in the next few
seconds using the rotary selector. Start the timer with
the
button.
u
Cooking time
If you set the cooking time for your meal, the operation
stops automatically once this time has elapsed. The
oven stops heating.
Prerequisite: A type of heating and a temperature have
been set.
For example: Setting for 4D hot air, 180 °C, cooking
time 45 minutes.
Press the
button.
0
1.
The time-setting options menu opens.
Set the cooking time using the rotary selector.
2.
Use the
button to start.
u
3.
You can see the
x
the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the
0
Cancelling the cooking time
Press the
button to open the time-setting options
0
menu. Turn the time back. The type of heating and
temperature set are shown in the display.
button to cancel the audible
0
button to
cooking time counting down in
button.
Changing the cooking time
Press the
button to open the time-setting options
0
menu. Change the cooking time using the rotary
selector.
End time
If you change the end time, please remember that
easily spoiled foods must not be allowed to remain in
the cooking compartment for too long.
Prerequisite: The selected operation has not already
begun. A cooking time has been set. The time-setting
options menu
is open.
0
Example in the picture: You put the dish in the cooking
compartment at 9:30. It takes 45 minutes to cook and
will be ready at 10:15, but you would like it to be ready
at 12:45 instead.
Touch the "End
" field.
y
1.
The end time is displayed.
Using the rotary selector, set a later end time.
2.
Confirm by pressing the
3.
The oven is in standby. The
when the operation will be finished appear in the status
bar. The operation starts at the appropriate time. You
can see the cooking time counting down in the status
bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the
0
Correcting the end time
This is possible if the oven is in standby. Use the
button to open the time-setting options menu, touch
Time-setting options
button.
u
symbol and the time
y
button.
en
0
17
Advertisement
Table of Contents
