Table of Contents
Advertisement
ASSEMBLY
To hire an authorized service technician to assemble the abdominal exerciser, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the abdominal exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
and an
adjustable wrench
.
See the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if
it has been preassembled. To avoid damaging parts, do not use power tools for assembly.
M8 Locknut
M10 Locknut
M6 Washer
M8 Washer
(46)–1
(38)–1
(35)–4
(34)–13
M10 Curved
Large Washer
Pivot Washer
Washer (39)–2
(41)–1
(43)–1
M4 x 16mm
M6 x 15mm
M8 x 15mm
M8 x 55mm Button
Flange Screw
Button Screw
Button Screw
Bolt (47)–1
(48)–2
(28)–4
(29)–12
M10 x 157mm Button Bolt (30)–1
5
Advertisement
Table of Contents
