Table of Contents
Advertisement
7700 MultiFrame Manual
7707OO-HD SD/HD Fiber Optic Wavelength Converter
OPTICAL INPUT:
Input for SDI optical signals. Available in SC/PC, ST/PC, FC/PC female connectors.
Accepts SMPTE 292M, SMPTE 259M, SMPTE 344M, DVB-ASI or SMPTE 310M
optical signals and provides auto-rate selection and reclocking for rates from
143Mb/s to 1.485Gb/s. A non-reclocking mode is also selectable via card edge
jumpers, or through the VistaLINK
wavelengths of 1270nm to 1610nm, accommodating standard, CWDM or DWDM
transmission schemes.
OPTICAL OUTPUT: There is one SC/PC (shown), ST/PC or FC/PC female connector with the video
output converted to an optical signal as specified in section 3.2. The optical output
laser is enabled only while a valid input signal is detected indicated by the SIGNAL
VALID LED.
SDI OUTPUT:
The 7707OO-HD provides two reclocked serial digital video outputs for signal
distribution. Both outputs maintain the same polarity as the input and are DVB-ASI
compliant.
2.1.
CARE AND HANDLING OF OPTICAL FIBER
2.1.1. Safety
!
Background colour: yellow
Triangular band: black
Symbol: black
2.1.2. Assembly
Assembly or repair of the laser sub-module is done only at Evertz facility and performed only by qualified
Evertz technical personnel.
2.1.3. Labeling
Certification and Identification labels are combined into one label. As there is inadequate space on the
product to place the label, it is reproduced here in the manuals.
•
There is no date of manufacture on this label as it can be traced by the code label placed on the
printed circuit board of each Evertz plug-in module
•
The Model number is one of: 7707OO13-HD, 7707OO13-HD-H, 7707OO15-HD
7707OOxx-HD, (xx = 27, 29, 31, 33, 35, 37, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61)
7707OODyyy-HD (Dyyy represents ITU Grid Channel: D200, D210, D220, D230, D240, D250,
D260, D270, D280, D290, D300, D310, D320, D330, D340, D350, D360, D370, D380, D390,
D400, D410, D420, D430, D440, D450, D460, D470, D480, D490, D500, D510, D520, D530,
D540, D550, D570, D580, D590, D600)
7707OO-HD-4
interface. This wide range input accepts optical
®
CLASS 1 LASER PRODUCT
Revision 1.5
Advertisement
Table of Contents
