Advanced Rth Settings; Pilot Rth; Custom Rth - Parrot ANAFI User Manual

Tap Copy to copy coordinates to clipboard – and reuse as custom RTH point, for instance. Note the
faint Copied to clipboard notification on the latest screen capture. Notification position and format
differ from one device operating system to another.
Tap an option at the bottom of the screen to select
Reticle (default)
Drone
Dynamic
*Refer to the "Map-based flying
Tap Share from coordinates options to open your device's sharing options, like on the screenshot.
Tap X to exit coordinate options back to the full screen map.

Advanced RTH settings

The custom RTH option relies on managing coordinates, described in the previous section.
Activate advanced RTH settings through the Safety Preferences of FreeFlight 6 USA (refer to the
"PREFERENCES / Safety" section of this guide for more information).
There are two advanced RTH options: Pilot, and Custom.
Important: By activating advanced RTH features, the drone might not be able to reach its destination
in case of low battery, if you select return to Pilot, or a Custom position. Parrot will not be held
responsible in the event that the drone lands in a different location.

Pilot RTH

When you select the Pilot advanced RTH option, ANAFI USA returns to the GPS position of the
Skycontroller at the exact moment an
the controller, in case it has lost GPS synchronization.
For this reason, we recommend ANAFI USA pilots remain in the same location, after they have
activated an RTH button, when in Pilot advanced RTH mode.

Custom RTH

When you activate the Custom advanced RTH option, set up ANAFI USA for a flight and it has a GPS
synchronization, the current position of the drone appears in the "Custom point" field by default.
32
Coordinates options, copy activated (iOS)
displays center of the map coordinates
displays drone coordinates (when online), or last known position (when
offline)
displays drone, POI or WP coordinates (autonomous or assisted flights only*)
modes" section of this guide for more information.
RTH button is activated, or to the last known coordinates of