Danfoss DEVIreg Touch Installation Manual page 19

DEVIreg™ Touch
Press SETTINGS in the bot-
2.
tom right corner of the menu.
Then press INSTALLATION
and MANUAL SETUP.
Press MAX. FLOOR. Then use
3.
the < and > arrows to set the
allowed maximum oor
temperature. Press
con rm.
To return to the normal temperature display, press the back
arrow in the upper left corner of the screen until you get to
the main menu, then press
If you break the small plastic
seal on the back of the display
module, e.g. using a screwdriver,
it will be possible to set the
maximum oor temperature
up to 45°. Furthermore, it
will be possible to use only
a room sensor. However, this
option is not recommendable
due to an increased risk of
overheating the oor.
Installation Guide
to
.
19