Table of Contents
Advertisement
r r r r r Switching Power Supply Requirement (at least 200 Watts)
* 3.3V at 10Amps is necessary too guarantee full loading operation
because some AGP cards and memory modules have high current
consumption.
The on-board 3.3v regulator provides maximum 6Amp current drive
capability for AGP cards and memory modules.
Max. Regulation
Output Voltage
Requirement
+12V
+/- 5%
+5V
+/- 5%
+3.3V
+/- 5%
-5V
+/- 10%
-12V
+/- 10%
+5VSB
+/- 5%
Table 1-1
Min. Current
Requirement (Amps)
0
1
10*
0
0
0.05
Introduction
3
Advertisement
Table of Contents
