Table of Contents
Advertisement
Chapter 2
You do not need to make voltage settings because SeePU automatically
sets your CPU voltage.
5. Press Esc to return to the CMOS Setup Utility, press F10 to Save and Exit Setup
and choose 'Y' to confirm. The system will automatically reboot and during startup
you will see the correct CPU type indicated on the start-up screen screen.
Overclocking
Operating a CPU at a higher frequency than it's specification allows is called overclocking.
If the CPU frequency is set at a higher frequency than it's specification allows, it may
or may not run at that freqency, depending on the quality of your CPU and the extent
to which the frequency has been overset. The mainboard manufacturer highly
discourages overclocking as it may result in data loss, CPU burn-out, system failure,
etc.
Many Pentium II processors are frequency locked processors and are not able to
perform overclocking. Regardless of whether the processor is a frequency locked,
overclocking may cause some processors to hang when turning on the system. When
the processor hangs, the screen remains blank and the system does not boot. To
solve this problem, do the following.
1. Turn off the computer and then press the Home key on your keyboard
2. Turn on your computer, wait for five seconds and then release the Home key.
(Pressing the Home key allows the computer to boot at a low system speed.
For example, for 66MHz external clock CPUs, the CPU boot-up speed is
233MHz. For 100MHz external clock CPUs, the CPU boot-up speed is
350MHz.)
3. Enter BIOS and reconfigure your CPU parameters as described in this section.
10
ROM PCI / ISA BIOS (2A69KC39)
SeePU & CHIPSET SETUP
AWARD SOFTWARE, INC.
SDRAM CAS latency Time
: 3
DRAM Data Integrity Mode
: Non-ECC
System BIOS Cacheable
: Disabled
Video BIOS Cacheable
: Disabled
Video RAM Cacheable
: Disabled
8 Bit I/O Recovery Time
: 1
16 Bit I/O Recovery Time
: 1
Memory Hole At 15M-16M
: Disabled
Passive Release
: Enabled
Delayed Transaction
: Enabled
AGP Aperture Size (MB)
: 64
Power Failure Recovery
Spectrum Spread
Flash BIOS Protection
*****
CPU Setup
CPU Type
: User's Define
Frequency Ratio
: 3.5X
CPU Bus Frequency
:100MHz
ESC: Quit
F1 : Help
P U / P D / + / - : Modify
F5 : Old Values
(Shift) F2
F7 : Load Setup Defaults
Figure 2-7
: Disabled
: Disabled
: Disabled
*****
:Select Item
: Color
Advertisement
Table of Contents
