Via Service Interface (Cdi); Setting The Operating Language; Local Display; Operating Tool - Endress+Hauser Micropilot FMR60B PROFIBUS PA Operating Instructions Manual

Micropilot FMR60B PROFIBUS PA
Endress+Hauser
9.3.2

Via service interface (CDI)

1
1 Computer with FieldCare/DeviceCare operating tool
2 Commubox FXA291
3 Service interface (CDI) of the measuring device (= Endress+Hauser Common Data Interface)
9.4

Setting the operating language

9.4.1

Local display

Setting the operating language
To set the operating language, the display first needs to be unlocked:
1. Press the  key for at least 2 s.
 A dialog box appears.
2. Unlock the display operation.
3. Select the Language parameter in the main menu.
4. Press the  key.
5. Select the desired language with the  or  key.
6. Press the  key.
Display operation locks automatically (except in the Safety mode wizard):
• after 1 min on the main page if no key has been pressed
• after 10 min within the operating menu if no key has been pressed
9.4.2

Operating tool

Set display language
System → Display → Language
Selection in the Language parameter; Visibility depends on order options or device
settings
2 3
Commissioning
A0039148
41