Micropilot FMR62B PROFINET with Ethernet-APL Important document information Symbols Safety symbols DANGER This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in serious or fatal injury. WARNING This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in serious or fatal injury.
Micropilot FMR62B PROFINET with Ethernet-APL Graphic conventions • Installation, explosion and electrical connection drawings are presented in simplified format • Devices, assemblies, components and dimensional drawings are presented in reduced-line format • Dimensional drawings are not to-scale representations; the dimensions indicated are rounded off to 2 decimal places •...
Micropilot FMR62B PROFINET with Ethernet-APL D = (c ∆t) / 2 where c is the speed of propagation of the wave. In summary, D can be calculated from the measured difference frequency Δf. D is then used to determine the content of the tank or silo.
Page 6
Micropilot FMR62B PROFINET with Ethernet-APL 100% A0051658 3 Usable measuring range Length of antenna + 10 mm (0.4 in) Usable measuring range 50 to 80 mm (1.97 to 3.15 in); medium εr < 2 Vessel height Reference point of measurement, varies depending on the antenna system For further information on the reference point, see →...
Page 7
To measure absorbing gases, either use a guided radar, measuring devices with another measuring frequency or another measuring principle. If measurements must be performed in one of these media, please contact Endress+Hauser. For the dielectric constants (DC values) of many media commonly used in industry, please refer •...
Page 8
Micropilot FMR62B PROFINET with Ethernet-APL Antenna, PTFE cladded flush mount, 50 mm (2 in) in storage vessel Media group Measuring range A0 (ε 1.2 to 1.4) 7 m (23 ft) A (ε 1.4 to 1.9) 12 m (39 ft) B (ε...
Page 9
Micropilot FMR62B PROFINET with Ethernet-APL PTFE Drip-off antenna, 50 mm (2 in) in buffer vessel Media group Measuring range A0 (ε 1.2 to 1.4) 4 m (13 ft) A (ε 1.4 to 1.9) 7 m (23 ft) B (ε 1.9 to 4) 13 m (43 ft) C (ε...
Page 10
Micropilot FMR62B PROFINET with Ethernet-APL Antenna, horn 316L, 65 mm (2.6 in) in buffer vessel Media group Measuring range A0 (ε 1.2 to 1.4) 11 m (36 ft) A (ε 1.4 to 1.9) 21 m (69 ft) B (ε 1.9 to 4) 40 m (131 ft) C (ε...
Page 11
Micropilot FMR62B PROFINET with Ethernet-APL Antenna, PTFE cladded flush mount, 80 mm (3 in) in vessel with agitator Media group Measuring range A0 (ε 1.2 to 1.4) 7 m (23 ft) A (ε 1.4 to 1.9) 13 m (43 ft) B (ε...
Micropilot FMR62B PROFINET with Ethernet-APL Measurement in bypass Bypass measuring conditions Application in vessels with moving medium surface (e.g. permanent free filling from above, mixing jets) Antenna, PTFE cladded flush mount, 80 mm (3 in) in bypass Media group Measuring range A0 (ε...
Page 13
Micropilot FMR62B PROFINET with Ethernet-APL Conformance Class Conformance Class B Netload Class Netload Class II Baud rates Automatic 10 Mbit/s with full-duplex detection Cycle times From 32 ms Polarity Auto-polarity for automatic correction of crossed TxD and RxD pairs Media Redundancy Protocol...
Micropilot FMR62B PROFINET with Ethernet-APL Dual compartment housing, L-form A0045842 6 Connection terminals and ground terminal in the connection compartment Positive terminal Negative terminal Internal ground terminal Terminals • Supply voltage and internal ground terminal: 0.5 to 2.5 mm (20 to 14 AWG) •...
Micropilot FMR62B PROFINET with Ethernet-APL Electrical connection Connection examples PROFINET with Ethernet-APL A0045802 8 Connection example for PROFINET with Ethernet-APL Automation system APL field switch Observe cable specifications Transmitter Potential equalization The protective ground on the device must not be connected. If necessary, the potential matching line can be connected to the outer ground terminal of the transmitter before the device is connected.
Micropilot FMR62B PROFINET with Ethernet-APL Cable entries A0046584 Single compartment housing, plastic Single compartment housing, aluminum Single compartment housing, 316L hygiene Dual compartment housing Dual compartment housing, L-form Cable entry Dummy plug The type of cable entry depends on the device version ordered.
Micropilot FMR62B PROFINET with Ethernet-APL Depending on the type of port (DC power supply, input/output port) different testing levels according to IEC / DIN EN 61326-1 against transient overvoltages (Surge) are applied (IEC / DIN EN 61000-4-5 Surge): Test level on DC power ports and input/output ports is 1 000 V line to earth Devices with optional overvoltage protection •...
Micropilot FMR62B PROFINET with Ethernet-APL Gas phase Temperature Pressure 1 bar (14.5 psi) 10 bar (145 psi) 25 bar (362 psi) +400 °C (+752 °F) –0.02 % +0.03 % +0.11 % Water (saturated steam) +100 °C (+212 °F) +0.02 % +180 °C (+356 °F)
Micropilot FMR62B PROFINET with Ethernet-APL Radial alignment of the antenna Based on the directional characteristic, radial alignment of the antenna is not necessary. Installation instructions Horn antenna 65 mm (2.56 in) Information about the mounting nozzle The maximum nozzle length H depends on the nozzle diameter D.
Page 23
Micropilot FMR62B PROFINET with Ethernet-APL Antenna, PTFE cladded, flush mount 50 mm (2 in) Mounting cladded flanges Note the following for cladded flanges: • Use the same number of flange screws as the number of flange bores provided. • Tighten the screws with the necessary torque (see Table).
Micropilot FMR62B PROFINET with Ethernet-APL Flange size Number of screws Tightening torque DN80 PN10/16 40 to 55 Nm DN80 PN25/40 40 to 55 Nm DN100 PN10/16 40 to 60 Nm DN100 PN25/40 55 to 80 Nm DN150 PN10/16 75 to 105 Nm ASME NPS 3"...
Page 25
Micropilot FMR62B PROFINET with Ethernet-APL α α A0031824 10 Relationship between beam angle α, distance D and beamwidth diameter W The beamwidth diameter W depends on the beam angle α and the distance D. Horn antenna 65 mm (2.56 in), α 4 °...
Micropilot FMR62B PROFINET with Ethernet-APL PTFE cladded, flush mount 50 mm (2 in) antenna, α 7 ° W = D × 0.12 5 m (16 ft) 0.61 m (2.00 ft) 10 m (33 ft) 1.22 m (4.00 ft) 15 m (49 ft) 1.83 m (6.00 ft) 20 m (66 ft) 2.44 m (8.01 ft)
Page 27
Micropilot FMR62B PROFINET with Ethernet-APL • Measurements can be performed through an open full bore ball valve without any problems. • At the transitions, no gap exceeding 1 mm (0.04 in) may be left. • Opening diameter of ball valve must always correspond to the pipe diameter; avoid edges and constrictions.
Page 28
Micropilot FMR62B PROFINET with Ethernet-APL 100% A0046559 12 Example of stilling well design. Unit of measurement mm (in) Stilling well with holes; example for flush mount antenna 80 mm (3 in) Stilling well with slots Full bore ball valve e.g.
Page 29
Micropilot FMR62B PROFINET with Ethernet-APL Recommendations for the bypass • Metal (no plastic or enamel liner) • Constant diameter • Select an antenna that is as big as possible; recommendation, use 80 mm (3 in) • Difference in diameter between antenna and inner diameter of the bypass as small as possible •...
Micropilot FMR62B PROFINET with Ethernet-APL The material thickness can be a full multiple of the optimum thickness (table); it is important to note, however, that the microwave transparency decreases significantly with increasing material thickness. Optimum material thickness Material Optimum material thickness PE;...
Page 31
Micropilot FMR62B PROFINET with Ethernet-APL Plastic housing Plastic housing; process temperature –20 to +150 °C (–4 to +302 °F) A0032024 15 Plastic housing; process temperature –20 to +150 °C (–4 to +302 °F) = T : –20 °C (–4 °F) | T : +76 °C (+169 °F)
Page 32
Micropilot FMR62B PROFINET with Ethernet-APL Restriction to a process temperature of 0 to +200 °C (+32 to +392 °F) with CSA C/US approval and plastic housing A0048826 18 Plastic housing; process temperature 0 to +200 °C (+32 to +392 °F) with CSA C/US approval = T...
Page 33
Micropilot FMR62B PROFINET with Ethernet-APL Plastic housing; process temperature –40 to +200 °C (–40 to +392 °F) A0032024 21 Plastic housing; process temperature –40 to +200 °C (–40 to +392 °F) = T : –40 °C (–40 °F) | T : +76 °C (+169 °F) = T...
Page 34
Micropilot FMR62B PROFINET with Ethernet-APL Restriction to a process temperature of 0 to +280 °C (+32 to +536 °F) with CSA C/US approval and plastic housing A0048826 24 Plastic housing; process temperature 0 to +280 °C (+32 to +536 °F) with CSA C/US approval = T...
Page 35
Micropilot FMR62B PROFINET with Ethernet-APL Plastic housing; process temperature –60 to +150 °C (–76 to +302 °F) A0032024 27 Plastic housing; process temperature –60 to +150 °C (–76 to +302 °F) = T : –60 °C (–76 °F) | T : +76 °C (+169 °F) = T...
Page 36
Micropilot FMR62B PROFINET with Ethernet-APL Restriction to a process temperature of 0 to +200 °C (+32 to +392 °F) with CSA C/US approval and plastic housing A0048826 30 CSA C/US approval and plastic housing; process temperature 0 to +200 °C (+32 to +392 °F) = T...
Page 37
Micropilot FMR62B PROFINET with Ethernet-APL Aluminum housing; process temperature –40 to +150 °C (–40 to +302 °F) A0032024 33 Aluminum housing, coated; process temperature –40 to +150 °C (–40 to +302 °F) = T : –40 °C (–40 °F) | T : +79 °C (+174 °F) = T...
Page 38
Micropilot FMR62B PROFINET with Ethernet-APL Aluminum housing; process temperature –40 to +450 °C (–40 to +842 °F) A0032024 36 Aluminum housing, coated; process temperature –40 to +450 °C (–40 to +842 °F) = T : –40 °C (–40 °F) | T : +79 °C (+174 °F) = T...
Page 39
Micropilot FMR62B PROFINET with Ethernet-APL Housing 316L 316L housing; process temperature –20 to +150 °C (–4 to +302 °F) A0032024 39 316L housing; process temperature –20 to +150 °C (–4 to +302 °F) = T : –20 °C (–4 °F) | T : +77 °C (+171 °F)
Page 40
Micropilot FMR62B PROFINET with Ethernet-APL 316L housing; process temperature –40 to +200 °C (–40 to +392 °F) A0032024 42 316L housing; process temperature –40 to +200 °C (–40 to +392 °F) = T : –40 °C (–40 °F) | T : +77 °C (+171 °F) = T...
Page 41
Micropilot FMR62B PROFINET with Ethernet-APL 316L housing; process temperature –60 to +150 °C (–76 to +302 °F) A0032024 45 316L housing; process temperature –60 to +150 °C (–76 to +302 °F) = T : –60 °C (–76 °F) | T : +77 °C (+171 °F) = T...
Page 42
Micropilot FMR62B PROFINET with Ethernet-APL 316L housing, hygiene; process temperature –20 to +200 °C (–4 to +392 °F) A0032024 48 316L housing, hygiene; process temperature –20 to +200 °C (–4 to +392 °F) = T : –20 °C (–4 °F) | T : +76 °C (+169 °F)
Micropilot FMR62B PROFINET with Ethernet-APL 316L housing, hygiene; process temperature –60 to +150 °C (–76 to +302 °F) A0032024 51 316L housing, hygiene; process temperature –60 to +150 °C (–76 to +302 °F) = T : –60 °C (–76 °F) | T : +76 °C (+169 °F)
Micropilot FMR62B PROFINET with Ethernet-APL • Thread G1/2, IP66/68 NEMA TYPE 4X/6P If the G1/2 thread is selected, the device is delivered with an M20 thread as standard and a G1/2 adapter is included with the delivery, along with the corresponding documentation •...
–20 to +200 °C (–4 to +392 °F) The pressure range may be further restricted in the event of a CRN approval. Dielectric constant For liquids ε ≥ 1.2 Contact Endress+Hauser for applications with lower dielectric constants than indicated. Endress+Hauser...
Micropilot FMR62B PROFINET with Ethernet-APL Mechanical construction Dimensions The dimensions of the individual components must be added together for the total dimensions. Single compartment housing, plastic 94 (3.7) 107.5 (4.23) A0048768 53 Dimensions of single compartment housing, plastic (PBT). Unit of measurement mm (in)
Page 47
Micropilot FMR62B PROFINET with Ethernet-APL 316L single compartment housing, hygiene 92 (3.62) 123 (4.84) A0050364 55 Dimensions of 316L single compartment housing, hygiene. Unit of measurement mm (in) Height with cover with glass viewing window (dust Ex) Height with cover with plastic viewing window...
Page 48
Micropilot FMR62B PROFINET with Ethernet-APL Aluminum dual compartment housing 132 (5.2) 121 (4.76) 115 (4.53) 118 (4.65) 64 (2.52) 54 (2.13) 78 (3.07) 143 (5.63) A0038377 56 Dimensions of dual compartment housing. Unit of measurement mm (in) Height with cover with glass viewing window (devices for Ex d/XP, Dust-Ex)
Page 49
Micropilot FMR62B PROFINET with Ethernet-APL Aluminum or 316L dual compartment housing, L-form 110 (4.33) 101 (3.98) 140 (5.51) 138 (5.43) A0038381 57 Dimensions of dual compartment housing, L-form. Unit of measurement mm (in) Height with cover with glass viewing window (devices for Ex d/XP, Dust-Ex)
Page 50
Micropilot FMR62B PROFINET with Ethernet-APL Drip-off antenna - flange process connection 42.5 (1.67) A0046498 59 Dimensions of flange process connection. Unit of measurement mm (in) Process temperature version ≤150 °C (302 °F) Process temperature version ≤200 °C (392 °F)
Page 51
Micropilot FMR62B PROFINET with Ethernet-APL Antenna, cladded flush mount, PTFE, 50 mm (2 in), with flange 47.5 (1.87) A0046486 60 Dimensions of antenna, cladded flush mount, PTFE, 50 mm (2 in), with flange. Unit of measurement mm (in) Process temperature version ≤150 °C (302 °F) Process temperature version ≤200 °C (392 °F)
Micropilot FMR62B PROFINET with Ethernet-APL Antenna, cladded flush mount, PTFE, 80 mm (3 in), with flange 75 (2.95) A0046487 61 Dimensions of antenna, cladded flush mount, PTFE, 80 mm (3 in), with flange. Unit of measurement mm (in) Process temperature version ≤150 °C (302 °F) Process temperature version ≤200 °C (392 °F)
Micropilot FMR62B PROFINET with Ethernet-APL Drip-off antenna 50 mm (2 in) 1.70 kg (3.75 lb) + flange weight Antenna, cladded flush mount, PTFE, 50 mm (2 in) 1.50 kg (3.31 lb) + flange weight Antenna, cladded flush mount, PTFE, 80 mm (3 in) 2.9 kg (6.39 lb) + flange weight...
Page 54
Micropilot FMR62B PROFINET with Ethernet-APL Materials in contact with the medium DN65 horn antenna A0046618 62 Material; DN65 horn antenna. Unit of measurement mm (in) Horn: 316L / 1.4404 Antenna: Al (ceramic) Antenna seal: graphite Process connection: 316L / 1.4404 Housing adapter: 316L / 1.4404...
Page 55
Micropilot FMR62B PROFINET with Ethernet-APL Antenna, cladded flush mount, PTFE, 50 mm (2 in), with flange A0046609 64 Material; antenna, cladded flush mount, PTFE, 50 mm (2 in), with flange Antenna: PTFE, seal material: PTFE (cladding) Process connection: 316L / 1.4404 Housing adapter: 316L / 1.4404...
Micropilot FMR62B PROFINET with Ethernet-APL Display and user interface Operating concept Operator-oriented menu structure for user-specific tasks • Guidance • Diagnostics • Application • System Fast and safe commissioning • Interactive wizard with graphical user interface for guided commissioning in FieldCare, DeviceCare or DTM, AMS and PDM-based third-party tools or SmartBlue •...
Micropilot FMR62B PROFINET with Ethernet-APL Local display Device display (optional) Functions: • Display of measured values and fault and notice messages • Background lighting, which switches from green to red in the event of an error • The device display can be removed for easier operation A0039284 ...
A0039148 Computer with FieldCare/DeviceCare operating tool Commubox FXA291 Service interface (CDI) of the measuring device (= Endress+Hauser Common Data Interface) Via Web browser Function scope Thanks to the integrated Web server the device can be operated and configured via a Web browser.
Micropilot FMR62B PROFINET with Ethernet-APL CE mark The measuring system meets the legal requirements of the applicable EU directives. These are listed in the corresponding EU Declaration of Conformity together with the standards applied. The manufacturer confirms successful testing of the device by affixing to it the CE mark.
Micropilot FMR62B PROFINET with Ethernet-APL Astronomy stations Country Name of the station Latitude Longitude Germany Effelsberg 50° 31' 32" North 06° 53' 00" East Finland Metsähovi 60° 13' 04" North 24° 23' 37" East Tuorla 60° 24' 56" North 24° 26' 31" East France Plateau de Bure 44° 38' ...
Micropilot FMR62B PROFINET with Ethernet-APL This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
• Automatic verification of exclusion criteria • Automatic creation of the order code and its breakdown in PDF or Excel output format • Ability to order directly in the Endress+Hauser Online Shop Calibration Factory calibration certificate The calibration points are spread evenly over the measuring range (0 to 100 %).
Condition Monitoring system and the in-situ verification of devices in the application. The application package can be ordered together with the device or can be activated subsequently with an activation code. Detailed information on the order code is available via the Endress+Hauser website www.endress.com...
Micropilot FMR62B PROFINET with Ethernet-APL Heartbeat Monitoring Foam detection wizard and Build-up detection wizard are available, process windows can be configured. Furthermore, additional monitoring parameters can be displayed and used for predictive maintenance or application optimization. "Foam detection" wizard This wizard configures the automatic foam detection.
For an overview of the scope of the associated Technical Documentation, refer to the following: • Device Viewer (www.endress.com/deviceviewer): Enter the serial number from the nameplate • Endress+Hauser Operations app: Enter serial number from nameplate or scan matrix code on nameplate. Document function...
Page 69
Micropilot FMR62B PROFINET with Ethernet-APL Bluetooth® The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Endress+Hauser is under license. Other trademarks and trade names are those of their respective owners. Apple®...
Need help?
Do you have a question about the Micropilot FMR62B PROFINET with Ethernet-APL and is the answer not in the manual?
Questions and answers