Care And Cleaning - AEG HVB8453IB User Manual

The settings suggested in the cooking table should only serve as guidelines and be
adjusted depending on the rawness of food, its weight and quantity as well as on the type
of gas used and the material of the cookware used to prepare the dish.

7. CARE AND CLEANING

WARNING!
Refer to Safety chapters.
7.1 General information
• Clean the hob after each use.
• It is recommended to activate the lock /
child safety device function (Refer to
"Daily use" chapter).
• Always use cookware with a clean base.
• Scratches or dark stains on the surface
have no effect on how the hob operates.
• Use a special cleaner suitable for the
surface of the hob.
• Wash stainless steel parts with water, and
then dry them with a soft cloth.
The presence of water or other liquids on
the control panel can accidentally
activate or deactivate the hob functions.
WARNING!
Do not use knives, scrapers or similar
instruments to clean the surface of the
glass or the rims of the burners and the
frame (if applicable).
You can wash the burner crown in a
dishwasher.
CAUTION!
Do not clean the burner crown with
abrasive products, abrasive cleaning
pads, solvents or metal objects. Burner
crown may cause discoloration.
7.2 Pan supports
The pan supports are not resistant to
washing in a dishwasher. They must be
washed by hand.
1. Remove the pan supports to easily clean
the hob.
Be very careful when you replace the
pan supports to prevent the hob top
from damage.
2. The enamel coating occasionally can
have rough edges, so be careful when
you wash the pan supports by hand and
dry them. If necessary, remove stubborn
stains with a paste cleaner.
3. After you clean the pan supports, make
sure that they are in correct positions.
4. For the burner to operate correctly, make
sure that the arms of the pan supports
are inserted in the recesses of the
enamelled plates.
7.3 Removing and assembling pan
supports
After cleaning of the hob, make sure that pan
supports are in a correct position. In order to
place a pan support properly, make sure that
its arms fits the grips placed at the base of
the burner as shown in the picture. This way,
a pan support is stable and fixed.
ENGLISH 21