AEG HVB8453IB User Manual page 17

To activate the function: press
set any heat setting. Press and hold
seconds, until the indicator above the symbol
appears. Deactivate the hob with
The function stays active when you
deactivate the hob. The indicator above
is on.
To deactivate the function: press
not set any heat setting. Press and hold
for 3 seconds, until the indicator above the
symbol disappears. Deactivate the hob with
.
Cooking with the function activated: press
, then press for 3 seconds, until the
indicator above the symbol disappears. You
can operate the hob. When you deactivate
the hob with the function operates again.
5.9 Timer
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a single
cooking session.
Set the heat setting for the selected cooking
zone and then set the function.
1. Press . 00 appears on the timer
display.
2. Press or to set the time (00-99
minutes).
3. Press to start the timer or wait 3
seconds. The timer begins to count down.
To change the time: select the cooking zone
with and press
To deactivate the function: select the
cooking zone with
remaining time counts back to 00.
The timer finishes counting down, a signal
sounds and 00 blinks. The cooking zone
deactivates. Press any symbol to stop the
signal and blinking.
. Do not
for 3
.
. Do
or .
and press . The
Minute Minder
You can use this function when the hob is
activated but the cooking zones do not
operate. The heat setting shows 00.
The function has no effect on the
operation of the cooking zones.
1. Press .
2. Press or to set the time.
The timer finishes counting down, a signal
sounds and 00 blinks. Press any symbol to
stop the signal and blinking.
To deactivate the function: press
. The remaining time counts back to 00.
5.10 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on the basis of the mode setting
and temperature of the hottest cookware on
the hob. You can also operate the fan from
the hob manually.
CAUTION!
To ensure proper communication
between the appliances, the hood must
always be positioned centrally over the
hob, especially when their widths differ.
For most of the hoods, the remote
system is originally deactivated. Activate
it before you use the function. For more
information refer to the hood user
manual.
The hood operates only when the hob is
activated.
Operating the function automatically
To operate the function automatically set the
automatic mode to H1 – H6. The hood reacts
whenever you operate the hob. The hob
and
ENGLISH 17