Connect The Battery; Install The Vantage Connect; Mount The Vantage Connect Shelter - Davis Instruments Vantage Connect 6620 User Manual

For vantage pro2, vantage pro2 plus, vantage vue and weather envoy
Table of Contents

Advertisement

Connect the battery

The Vantage Connect is shipped with one battery cable (the red, or positive cable)
disconnected to prevent battery drain. Connect the red cable to the red terminal.
Note:
IMPORTANT: When putting your Vantage Connect into cold storage, disconnect the
red cable.

Install the Vantage Connect

If you have not already set up your ISS or additional station, do so first. (See the
instruction manual that came with your ISS or additional station.)

Mount the Vantage Connect shelter

Choose a location for your Vantage Connect. It can be mounted on a pole or a flat
surface such as a wall or a wooden post. The shelter should be mounted within
transmission range of your ISS. (Maximum of 1000 feet (300 m), line-of-sight,
open air.)
It is important that the shelter be mounted so that the solar panel gets the greatest
amount of sunshine -- the solar shelter should be facing south (in the northern
hemisphere) or north (in the southern hemisphere).
Tip:
Mounting the shelter may be easier if done by two people.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vantage connect 6621Vantage connect 6622

Table of Contents