Table of Contents
Advertisement
Access Data
See Current Data Online
Once your Vantage Connect is registered on the network, powered up, and
connected to both signals, it will begin uploading the latest data to the server.
Data is uploaded to your page on WeatherLink.com along with daily highs and
lows.
The My Weather page shows the weather conditions uploaded at the last upload
interval. (5, 15 or 60 minutes, depending on your service plan.)
The Summary page will show additional data and data from extra sensors as well
as highs and lows.
Download Data From WeatherLink Network to PC
You can download your data stored online to your PC through the WeatherLink
software and use WeatherLink to create graphs and reports. Downloading can be
done manually, or you can set up automatic downloads in WeatherLink software.
If you choose manual downloads, remember that the amount of data stored on the
server depends on the update interval of your service plan. Be sure to download
within the time period below for your service plan, otherwise older data will be
lost.
To set up a communication link between WeatherLink software and your
WeatherLink.com account, you must first set up the software.
1. Install WeatherLink software from the included CD.
2. Start WeatherLink.
name for the database that will store this station's data.
3. When prompted, click Yes to start the Walkthrough Setup.
4. Configure weather station: Enter station configuration information.
5. Set Communication Port: select TCP/IP. Click on Web Download and then
enter your weatherlink.com user ID and password.
6. Choose units you want your software to display.
7. You may set up optional automatic downloads. In order to use automatic
downloads, the PC must always be on with the software running. Click
Download At and pick download times (from once a day to once an hour).
10
Data Plan
5-minute plan
15-minute plan
60-minute plan
n the File pull-down menu, choose New Station... Enter a
I
Apprx. Max
Data Stored
1 month
3 months
1 year
Advertisement
Table of Contents
