and vane were spun. This false "high wind" data should be cleared.) To clear,
click Manage Stored Data.
5. Click Save.
6. You can edit these settings at any time by logging in to your account and
clicking My Account then [edit] (to edit account information or change your
password); or, in the My Device box: Edit Configuration, Edit Settings, or
Manage Stored Data.
Note:
These settings and configurations will be pushed to the Vantage Connect at the first
update after it is set up and powered. The changes will then be sent to your
WeatherLink.com page at the next update. So the changes will not appear on your
page after at least 2 update intervals. (Update intervals are 5, 15 or 60 minutes
depending on your service plan). With high network traffic, this may take longer.
Prepare for Installation
Remove all cardboard and packing materials from inside the shelter.
Before proceeding with installation, make sure the main power cable is
disconnected from the main power jack.
Main power jack
Main power cable
5