Table of Contents
Advertisement
Quick Links
Notes: Please refer to the Original Service Manual for :
CD Mechanism Unit (BRS12C), Order No. PSG1303059AE
Speaker system SB-PMX70EG-K, Order No. PSG1502006CE
TABLE OF CONTENTS
1 Safety Precautions----------------------------------------------- 3
1.1. General Guidelines---------------------------------------- 3
1.2. Before Repair and Adjustment ------------------------- 4
1.3. Protection Circuitry ---------------------------------------- 4
1.4. Caution For Fuse Replacement------------------------ 4
1.5. Safety Part Information----------------------------------- 4
2 Warning -------------------------------------------------------------- 6
to Electrostatically Sensitive (ES) Devices---------- 6
Model No.
Product Color: (S)...Silver Type (For EG/GN only)
PAGE
2.2. Precaution of Laser Diode -------------------------------7
2.4. Handling Precaution for Traverse Unit----------------9
3 Service Navigation --------------------------------------------- 11
3.1. Service Information -------------------------------------- 11
3.2. Software / Firmware Update -------------------------- 11
4 Specifications ---------------------------------------------------- 12
5 Location of Controls and Components------------------ 13
© Panasonic Corporation 2017. All rights reserved.
Unauthorized copying and distribution is a violation of
law.
CD Stereo System
SA-PMX82EB
SA-PMX82EG
SA-PMX82GN
SA-PMX82MEB
SA-PMX84EG
(K)... Black Type (For EB/EG only)
PSG1703006CE
PAGE
Advertisement
Table of Contents
Related Manuals for Panasonic SA-PMX82EB
Summary of Contents for Panasonic SA-PMX82EB
-
Page 1: Table Of Contents
2 Warning -------------------------------------------------------------- 6 4 Specifications ---------------------------------------------------- 12 2.1. Prevention of Electrostatic Discharge (ESD) 5 Location of Controls and Components------------------ 13 to Electrostatically Sensitive (ES) Devices---------- 6 © Panasonic Corporation 2017. All rights reserved. Unauthorized copying and distribution is a violation of law. - Page 2 15.1. Cabinet Parts Location --------------------------------- 69 5.1. Main Unit & Remote Control Key Button Operations ------------------------------------------------- 13 15.2. Packaging (For SC-PMX82/SC-PMX84) ---------- 70 6 Service Mode ----------------------------------------------------- 14 15.3. Packaging (For SC-PMX82M)------------------------ 71 15.4. Mechanical Replacement Parts List ---------------- 73 6.1.
-
Page 3: Safety Precautions
1 Safety Precautions 1.1. General Guidelines 1. IMPORTANT SAFETY NOTICE There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent X-RADIATION, shock, fire, or other hazards. -
Page 4: Before Repair And Adjustment
1.2. Before Repair and Adjustment Disconnect AC power & discharge AC Capacitors (C5700, C5701, C5702, C5704, C5705 and C5706) through a 10ohm, 1W resis- tor to ground. Caution : DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices. After repairs are completed, restore power gradually using a variac, to avoid overcurrent. - Page 5 Safety Ref. No. Part No. Part Name & Description Remarks PC5721 B3PBA0000579 PHOTO COUPLER PC5723 B3PBA0000579 PHOTO COUPLER PC5724 B3PBA0000579 PHOTO COUPLER P5701 K2AA2B000011 AC INLET R5700 ERJ12YJ125U 1.2M 1/2W R5701 ERJ12YJ125U 1.2M 1/2W K5G312YA0159...
-
Page 6: Warning
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensi- tive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD). -
Page 7: Precaution Of Laser Diode
2.2. Precaution of Laser Diode CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Caution: This product utilizes a laser diode with the unit turned "on", invisible laser radiation is emitted from the pickup lens. Wavelength: 790 nm (CD) Maximum output radiation power from pickup: 100 μW/VDE Laser radiation from the pickup unit is safety level, but be sure the followings:... -
Page 8: Service Caution Based On Legal Restrictions
2.3. Service caution based on Legal restrictions 2.3.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb). -
Page 9: Handling Precaution For Traverse Unit
2.4. Handling Precaution for Traverse Unit The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the Traverse Unit. Cautions to Be Taken in Handling the Optical Pickup Unit 2.4.1. - Page 10 Grounding for electrostatic breakdown prevention 2.4.2. Some devices such as the CD player use the optical pickup (laser diode) and the optical pickup will be damaged by static electricity in the working environment. Proceed servicing works under the working environment where grounding works is completed. 2.4.2.1.
-
Page 11: Service Navigation
3 Service Navigation 3.1. Service Information This service manual contains technical information which will allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual. -
Page 12: Specifications
Terminal type: USB-A Speaker: SB-PMX70EG-K USB Port USB port power DC OUT 5 V 2.1 A System : SC-PMX82EB-K Music center: SA-PMX82EB-K USB standard USB 2.0 High Speed Speaker: SB-PMX70EG-K Media file format support System : SC-PMX82GN-S Music center: SA-PMX82GN-S (*.mp3), AIFF (*.aiff), FLAC... -
Page 13: Location Of Controls And Components
5 Location of Controls and Components 5.1. Main Unit & Remote Control Key Button Operations... -
Page 14: Service Mode
6 Service Mode This unit is equipped with features of self diagnostic & doctor mode setting for checking the functions & reliability. 6.1. Service Mode Table Item FL display Key operation Mode name Description Step 1 : Select CD mode Service Mode To enter into Service Mode (Ensure no disc is inserted). -
Page 15: Service Mode Error Code
6.2. Service Mode Error Code 6.2.1. CD Mechanism Error Code Table Error Code Diagnostic Contents Description of error of error Automatic FL Display Remarks During normal operation, if CD H15 CD Open Abnormal Press [ ] on main unit for “POS_SW_R (OPEN_SW)”... -
Page 16: Doctor Mode
6.3. Doctor Mode 6.3.1. Doctor Mode Table 1 Item Key Operation FL Display Front Key Mode Name Description To enter into Doctor Mode for Doctor Mode (Display 1) In any mode: checking of various items and Press button on main unit follow by displaying EEPROM check sum [4] &... - Page 17 6.3.2. Doctor Mode Table 2 Item Key Operation FL Display Front Key Mode Name Description CD Combination To check the open/close In Doctor Mode: Test operation & inner outer disc Press [ ] follow by [1] & then [5] access operation. button on remote control.
-
Page 18: Sales Demonstration Lock Function Mode
6.3.3. Doctor Mode Table 3 Item Key Operation FL Display Front Key Mode Name Description Region Check Checking for model no and In Doctor Mode: Region Press [ ] follow by [1] & then [6] button on remote control. To cancel, press [0] button on remote The [NO DISC] display will appear after 2s. -
Page 19: Troubleshooting Guide
7 Troubleshooting Guide Caution: Press Power Button Check Primary E-Cap (C5720) Check Secondary Cap. (C5811) No Display on 1. AC Cord Plug-out Measured 300V or more of Unit or Remote Control Measured 8V or 13.5V FL Panel 2. Check Fuse(F1) = 0 ohm to Turn ON the Unit [refer to check point [refer to check point... - Page 20 3. Cannot Power ON due to Error code F61 Check DCDC IC Check Transistor (Q4204) Press Power Button FL Display (IC2900) Check Connector (CN1100) Measured at LB4208 of Unit or Remote Control Measured 14.5V at C2905 "F61" Measured 14.5V at Pin 6 [refer to check point to Turn ON the Unit [refer to check point...
- Page 21 7. USB Device Cannot Detect "NO DEVICE" USB/IPOD Press Power Button Press "Selector"on Main Unit Plug in USB/iPod Device and operating of Unit or Remote Control or USB on remote to go FL Display "USB/IPOD" normally to Turn ON the Unit USB mode (FL Display) FL Display "USB NO DEVICE"...
- Page 22 9. No Output Sound 9.1. CD Play Press the Power Button Press Play No Problem Output Sound of Unit or Remote Control CD Mode FL Display " Track & Count" Found to Turn ON the Unit Change Main PCB Change CD Mechanism 9.2.
- Page 23 10. Check Point 10.1. Power PCB (SMPS PCB) Sec. Cap. C5811 (>7.5V or 13.5V) Sec. Cap. C2905 Fuse (F1) Pri. Cap (C5720) (14.5/12V) (0 ohm) (300V or more) 10.2 Main PCB IC1103 (3.3V) LB1108 = 5V (IC1104) LB1103 = 5.6V (IC1102) LB1101 = 5.2V (IC1101)
- Page 24 L4208 = 12V (Q4204) IC4200 pins 1/21/22/23/44 = 12V IC1106 (1.6V) LB8025 = 3.3V (IC8008 ) CN1101 pin 2/3 = 5.2V after R8441 = 3.6V...
-
Page 25: Disassembly And Assembly Instructions
8 Disassembly and Assembly Instructions Caution Note: • This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo- nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in this service manual) •... -
Page 26: Disassembly Flow Chart
8.1. Disassembly flow chart The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser- vicing. To assemble the unit, reverse the steps shown in the chart below. 8.2. Type of screws... -
Page 27: Main Parts Location Diagram
8.3. Main Parts Location Diagram... -
Page 28: Disassembly Of Top Cabinet
Step 3 : Lift up Top Cabinet as arrow shown. 8.4. Disassembly of Top Cabinet Step 4 : Remove Top Cabinet. Step 1 : Remove 2 screws. Step 2 : Remove 3 screws. -
Page 29: Disassembly Of Front Panel Unit
Step 5 : Upset the set. 8.5. Disassembly of Front Panel Step 6 : Release tab 1 and gap 2. Unit Step 7 : Press to release catches. Step 8 : Release tab 4 and gap 5. • Refer to “Disassembly of Top Cabinet” Step 9 : Slightly lift forward and remove Front Panel Unit. -
Page 30: Disassembly Of Panel P.c.b. Unit
8.6. Disassembly of Panel P.C.B. 8.7. Disassembly of Headphone Unit P.C.B. • Refer to “Disassembly of Top Cabinet” • Refer to “Disassembly of Top Cabinet” • Refer to “Disassembly of Front Panel Unit” • Refer to “Disassembly of Front Panel Unit” •... -
Page 31: Disassembly Of Usb P.c.b
8.9. Disassembly of USB P.C.B. 8.10. Disassembly of SMPS P.C.B. • Refer to “Disassembly of Top Cabinet” • Refer to “Disassembly of Top Cabinet” • Refer to “Disassembly of Front Panel Unit” Step 1 : Detach 15P Wire at connector (CN1100) on Main Step 1 : Remove screw. -
Page 32: Disassembly Of Main P.c.b
8.11. Disassembly of Main P.C.B. 8.12. Disassembly of Inner Chassis • Refer to “Disassembly of Top Cabinet” • Refer to “Disassembly of Top Cabinet” • Refer to “Disassembly of Front Panel Unit” • Refer to “Disassembly of Front Panel Unit” •... -
Page 33: Disassembly Of Dab P.c.b
8.13. Disassembly of DAB P.C.B. 8.14. Disassembly of CD • Refer to “Disassembly of Top Cabinet” Mechanism Unit • Refer to “Disassembly of Front Panel Unit” • Refer to “Disassembly of Top Cabinet” • Refer to “Disassembly of SMPS P.C.B.” •... -
Page 34: Replacement Of Traverse Unit
Step 2 : Slide tray out fully. 8.15. Replacement of Traverse Unit • Refer to “Disassembly of CD Mechanism Unit” 8.15.1. Disassembly of Traverse Unit Caution : Refer to “2.4 Handling Precaution for Traverse Unit” to prevent static damage to the Optical Pickup Unit. Note: 1. - Page 35 Step 4 : Release the guide as shown & slide Traverse Slide Step 6 : Lift up Traverse Unit by approximately 45°. Plate to the end. Step 7 : Remove traverse unit as arrow shown. Step 5 : Detach 5P FFC at the connector (CN7001) on CD Interface P.C.B..
- Page 36 Step 2 : Insert Traverse Unit at approximately 45° into mecha Caution : Avoid touching the surface of the Optical Pickup unit as arrow shown. Unit on the traverse unit. 8.15.2. Assembly of Traverse Unit Step 1 : Release the guide as shown & slide Traverse Slide Plate to the end.
- Page 37 Step 3 : Insert Traverse Unit properly into the grooves. Step 4 : Slide Traverse Slide Plate to lock the Traverse Unit as shown. Step 5 : Connect 5P FFC at connector (CN7001) on CD Inter- face P.C.B.. Step 6 : Slide Traverse Slide Plate until it stop at the guide.
- Page 38 Step 7 : Align and insert the tray into the mecha unit. Step 9 : Slide the tray in fully. Step 8 : Align the guides of the Traverse Slide Plate with the grooves when sliding the tray in.
- Page 39 Step 2 : Remove 2 screws. 8.15.3. Disassembly of CD Interface P.C.B. Step 3 : Attach short pin to Traverse Unit. • Refer to “Disassembly of CD Mechanism Unit” • Refer to “Disassembly of Traverse Unit” Note : The circuit is to be short to prevent electrostatic dis- charge during replacement of CD Interface P.C.B..
-
Page 40: Disassembly Of Bluetooth P.c.b
8.16. Disassembly of Bluetooth 8.17. Disassembly of Rear Cabinet • Refer to “Disassembly of Top Cabinet” P.C.B. • Refer to “Disassembly of Front Panel Unit” • Refer to “Disassembly of Top Cabinet” • Refer to “Disassembly of SMPS P.C.B.” • Refer to “Disassembly of Front Panel Unit” •... -
Page 41: Service Position
9 Service Position Note: For description of the disassembly procedures, see the Section 8 9.1. Checking of Panel, Main, SMPS and CD Interface P.C.B. Step 1 : Connect 7P wire at the connector (CN1101) on the Main P.C.B.. Step 2 : Connect 9P wire at the connector (CN8003) on the Main P.C.B.. Step 3 : Connect 10P FFC at connector (CN5001) on Main P.C.B.. -
Page 43: Block Diagram
CN5001 CLOSE_SW CLOSE_SW CN6004 CN7001 OPEN_SW OPEN_SW CN7002 CN5001 OPEN_SW 2D+ 3 OPEN_SW USB PORT S7201 2D+ 4 (PC IN) RESET RESET_SW CN7002 CN5001 RESET_SW INNER_SW VBUS USB_B_VBUS CD INTERFACE P.C.B. SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG SERVO & SYSTEM CONTROL BLOCK DIAGRAM... -
Page 44: Audio Block Diagram
18 PWM_D DSP_RESET RST_N VALID 24 7 RST_AB BST_C D4200 17 RST_CD DSP_SCL CLK110M 38 +3.3V CN4200 X4100 OUT_C RIGHT DSP_SDA D8000 CN4200 OUT_D BST_D DAMP_MUTE 5 SD DC DETECT DC_DET_DAMP +27.5V CIRCUIT Q4200,Q4201 Q4202,Q4203 SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG AUDIO BLOCK DIAGRAM... -
Page 45: Power Supply (1/2) Block Diagram
IC5802 SHUNT SHUNT REGULATOR REGULATOR IC1103 +3.3V VOLTAGE PC5721,Q5801 Q5803,Q5804,Q5806 REGULATOR ECO_CTL H2015 CN1100 ECO_CTL PW_STBY3R3V ECO_CTL +3.3V BOOT 6 IC1106 FB 4 +1.55V VOLTAGE PW_STBY3R3V REGULATOR PRIMARY SECONDARY PW_STBY1R55V +1.55V VOUT SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG POWER SUPPLY (1/2) BLOCK DIAGRAM... -
Page 46: Power Supply (2/2) Block Diagram
PW_STBY3V3 STBY_3.3V ZJ9200 ZJ920 STBY_3.3V STBY_3.3V +3.3V PW_STBY3V3 +3.3V PW_D3R3V_SOC D3.3V_SOC CN8001 CN9200 D3.3V_SOC PW_D3R3V +3.3V DAB P.C.B. PW_D3R3V PW_D3.3V CN8008 D3R3V D3R3V +3.3V BLUETOOTH P.C.B. PW_BT_5V PW_BT_5V PW_BT_5V PW_BT_5V CN8003 CN7230 SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG POWER SUPPLY (2/2) BLOCK DIAGRAM... -
Page 47: Wiring Connection Diagram
IR SENSOR P.C.B. DAB ANTENNA UNIT BLUETOOTH P.C.B. CN4300 DAB P.C.B. ZJ920 CN1100 CN9200 P9200 H2015 PANEL P.C.B. P9100 HEADPHONE P.C.B. P5701 SMPS P.C.B. (TO GND) 220V ~ 240V 50Hz CN9202 P3000 JK3000 ZJ9200 HEADPHONE SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG WIRING CONNECTION DIAGRAM... -
Page 49: Schematic Diagram
12 Schematic Diagram • Voltage and signal line 12.1. Schematic Diagram Notes : +B Signal Line (All schematic diagrams may be modified at any time with the development of new technology) : Audio Signal Line Notes: RESET switch. : USB Signal Line S7201: RWD switch ( S9203:... -
Page 51: Main (Micon) Circuit
90 ohm IC8006 CK8043 C0JBAZ003040 CK8045 CK8044 CK8046 CN1101 K1KA07AA0714 USB A (FRONT) FROM USB SUB PCB LOCATION TOP PCB C8361 F1H1H101B052 SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG MAIN (MICON) CIRCUIT TO USB SUB PCB R8464 C1168 D0GB680JA065 F1H1H102B047 R1165 D0GBR00J0004 CHASSIS SCREW POINT... -
Page 52: Main (Mport/Adc) Circuit
TO Selector 1 (@ DSP) I2S_SDO2 D0GA221JA023 TO SILICON TUNER CLK_TUN_LRCK R2060 CLK_TUN_BCK TO SILICON TUNER R2054 R2056 R2061 R2052 TO Selector 1 (@ DSP) I2S_LRCK2 R2057 D0GA221JA023 TO Selector 1 (@ DSP) I2S_BCK2 D0GA221JA023 SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG MAIN (MPORT/ADC) CIRCUIT... -
Page 53: Main (Cd Motor Driver) Circuit
CK5027 R5019 D0GB4R7JA065 R5022 CK5023 CD_LD CD-LD D0GB101JA065 CK5024 C5002 Q5002 MD/LPD F1H1H103B047 B1ADCF000001 F1G1C104A146 C5028 D0GAR00J0005 R5036 F1G1C104A146 D0GB225JA065 CK5025 C5027 C5018 DVD-LD F1J1A106A043 F1H1H103B047 CK5026 GND-LD PW_USB5R2V PW_USB5R2V J0JYC0000656 LB5002 SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG MAIN (CD MOTOR DRIVER) CIRCUIT... -
Page 54: Main (Supply) Circuit
R1150 R1149 LB1116 Vout PW_VIRTUAL SHDN J0JHC0000118 R1167 C1160 Vref=2.5V C1159 C1158 LB1117 SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG MAIN (SUPPLY) CIRCUIT Place R1150 - R1152 close to IC1110 pin 3 route after C1153 and C1154 PW_VH J0JHC0000118 VHGND C1176 F1H1H104B047 TO FL... -
Page 55: Main (Dsp/Damp/Headphone) Circuit
I2S_LRCK D0GAR00J0005 R4151 R4136 FOR Non DAB: MOUNT FROM SILICON TUNER I2S_LRCK2 (From Seletor 3) R4151 R4152 R4152 D0GB330JA065 R4131 D0GB330JA065 R4133 FROM SILICON TUNER I2S_BCK2 (From Seletor 3) CK4310 FROM SOC (p82) I2S_BCK SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG MAIN (DSP/DAMP/HEADPHONE) CIRCUIT... -
Page 56: Cd Interface & Usb Circuit
USB5V SPM- G2 G3 CLOSE_SW USB5V DGND REST_SW TO MAIN P.C.B. DGND OPEN_SW (CN5001) LDM- S7201 LDM+ RESET TRV- TRV+ M7301* TRAVERSE MOTOR NOTE: “ * ” REF IS FOR INDICATION ONLY SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG CD INTERFACE / USB CIRCUIT... -
Page 57: Panel, Ir Sensor & Headphone Circuit
C3001 LB3002 HP_GND ZJ920 HEADPHONE R921 C920 C3004 R3000 C3000 REM_IN HP_GND LB3000 R920 STBY_3.3V J0JGC0000070 HP_DET DGND SPMS_GND DGND C3003 NOTE: “ * ” REF IS FOR INDICATION ONLY SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG PANEL / IR SENSOR / HEADPHONE CIRCUIT... -
Page 58: Smps Circuit (1/2)
SWITCH R5834 SHUNT REGULATOR 220K B1ADCF000001 IC5801 SWITCH C0DAAYY00072 R5812 2.4K SHUNT REGULATOR C5812 R5835 R5815 C5808 1000P 100K 6.3V100 R5801 6.8K Q5801 B1ABGC000001 ECO CONTROL NOTE: “ * ” REF IS FOR INDICATION ONLY SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG SMPS CIRCUIT... - Page 59 DA2J10100L B0EAMM000057 C5725 680P Q5702 R5730 R5721 5.6K 2.2K B1BABG000007 VOLTAGE REGULATOR C5723 C5729 50V10 50V10 C5722 D5704 R5719 C5727 100P DZ2J200M0L C5728 D5707 1000P DA2J10100L NOTE: “ * ” REF IS FOR INDICATION ONLY SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG SMPS CIRCUIT...
-
Page 60: Dab Circuit
AVDD_DAC VDD_SYNTH VSS_VCO DAC_OUT_R VDD_VCO AVSS_DAC VDD_RF_IN_1V8 DAC_OUT_L 24 25 30 31 32 33 35 36 42 43 G1C68NJA0037 0.01 J0JYC0000051 470P G1CR22GA0007 DAB ANT / FM ANT 0.022 1000P 470P G1CR12GA0007 3.3P 6.8K J0JYC0000051 100K SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG CIRCUIT... -
Page 61: Printed Circuit Board
IBTA609 RL4002 R1159 R1158 R1157 R1156 D1116 C4242 C4260 IBTA129 IBTA51 IBTA50 R4270 LB4202 CK1111 R4238 IBTA461 IBTA460 CK1103 CK1105 CK1107 IBTA132 IBTA130 CK1100 CK1101 CK1109 CK1104 CK1106 CK1110 CK1102 IBTA600 LB4201 CK1108 (SIDE A) SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG MAIN P.C.B. -
Page 62: Main P.c.b. (Side B)
C4334 R4218 IBTA690 MK20 IC1111 IBTA691 C1126 IBTA755 R1161 L4208 MK14 IBTA641 LB4305 LB1116 MK17 IBTA574 L4205 C4248 Q4204 C4325 C4326 FL4000 C4238 IBTA612 IBTA679 IBTA613 C4257 CN1100 IBTA611 D4202 MK18 LB4304 IBTA568 (SIDE B) SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG MAIN P.C.B. -
Page 63: Cd Interface, Usb, Headphone & Dab P.c.b
6416-22 C3000 C3001 P3000 (SIDE A) (SIDE B) JK3000 HEADPHONE 6473-2 6473-2 PbF 6473-2 6473-2 SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG CD INTERFACE / USB / HEADPHONE / DAB P.C.B. NOTE: " * " REF IS FOR INDICATION ONLY (SIDE A) (SIDE B) -
Page 64: Panel & Ir Sensor P.c.b
R9218 TREBLE BASS ET9000* CN9202 S9208 (OPEN/CLOSE) ZJ9200 6417-2 6417-2 VOLUME IR SENSOR P.C.B. (TNPA6419) ZJ920 C920 R920 R921 IR921 SENSOR 6419-2 6419-2 SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG PANEL / IR SENSOR P.C.B. NOTE: " * " REF IS FOR INDICATION ONLY... -
Page 65: Smps P.c.b
ZJ5701 C5700 R5834 R5726 R5727 D5709 R5704 R5705 L5702 C5845 6420-2 6420-2 CAUTION RISK OF ELECTRIC SHOCK AC VOLTAGE LINE. PLEASE DO NOT TOUCH THIS P.C.B SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG SMPS P.C.B. NOTE: " * " REF IS FOR INDICATION ONLY... -
Page 67: Voltage Measurement
1.07 1.08 3.21 1.60 1.60 1.60 1.60 1.60 3.27 0.01 0.49 1.49 IC8001 REF NO. MODE POWER ON 1.60 1.60 1.60 1.60 0.01 0.98 0.98 0.98 3.26 3.29 3.29 3.28 3.31 3.31 3.28 3.29 3.29 SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG MAIN P.C.B. -
Page 68: Main P.c.b. (2/2)
1.75 3.25 3.15 3.15 3.24 3.29 3.26 IC8001 REF NO. MODE POWER ON 0.85 1.62 0.85 1.41 1.51 SA-PMX82EB/EG/GN, SA-PMX82MEB, SA-PMX84EG MAIN P.C.B. 14.3. SMPS & PANEL P.C.B. IC1111 REF NO. MODE POWER ON 0.47 19.47 110.7 IC2900 REF NO. -
Page 69: Main Unit & Remote Control Key Button 15.1. Cabinet Parts Location
15 Exploded View and Replacement Parts List 15.1. Cabinet Parts Location DP9300 CN9200 P9200 (DAB P.C.B.) VR9200 VR9201 VR9202 (PANEL P.C.B.) CN6100 (USB P.C.B.) CN6101 P9100 CN9202 ZJ9200 ZJ920 T5701 P5701 P3000 (IR SENSOR P.C.B.) IR921 (HEADPHONE P.C.B.) JK3000 H2015 (MAIN P.C.B.) (SMPS P.C.B.) 17-2... -
Page 70: Packaging (For Sc-Pmx82/Sc-Pmx84)
15.2. Packaging (For SC-PMX82/SC-PMX84) AC CORD ACCESSORIES BAG (FOR EB ONLY) A1 REMOTE CONTROL AC CORD (FOR EG ONLY) AC CORD (FOR GN ONLY) SA-PMX82 & SA-PMX84 O/I BOOK A5 SPEAKER CABLE SB-PMX70 DAB ANTENNA POLYFOAM (LEFT) F R O N POLYFOAM (RIGHT) SC-PMX82 SC-PMX84... -
Page 71: Packaging (For Sc-Pmx82M)
15.3. Packaging (For SC-PMX82M) ACCESSORIES BAG O/I BOOK A5 SPEAKER CABLE DAB ANTENNA SA-PMX82 POLYFOAM (LEFT) F R O N POLYFOAM (RIGHT) SC-PMX82MEBK PACKAGING DRAWING... -
Page 73: Mechanical Replacement Parts List
15.4. Mechanical Replacement Parts List Safety Ref. No. Part No. Part Name & Qty Remarks Description Safety Ref. No. Part No. Part Name & Qty Remarks RKM0766-S TOP CABINET 82EGS, Description 82GNS, 84EGS CABINET AND RYP2063J-K FRONT PANEL 82EGK, CHASSIS ASS’Y 82EBK RYP2063J-S... - Page 74 Safety Ref. No. Part No. Part Name & Qty Remarks Description RSC1097 D-AMP HEAT ABSORBER RSC1305 THERMAL PAD RMN1049-1 FL HOLDER XTB3+8JFJ SCREW RHD26046-L SCREW RHD30007-1SJ SCREW 82EGS, 82GNS, 84EGS RHD30007-K2J SCREW 82EGK, 82EBK, 82MEBK, 84EGK RHD30111-31 SCREW RHDX031008 SCREW RHDX30005-J SCREW XTB3+8JFJ-J...
-
Page 75: Electrical Replacement Parts List
15.5. Electrical Replacement Parts List Safety Ref. No. Part No. Part Name & Qty Remarks Description Safety Ref. No. Part No. Part Name & Qty Remarks Description PRINTED CIRCUIT BOARD PRINTED CIRCUIT BOARDS PCB3 TNPA6416AD USB P.C.B (RTL) 82EBK, PCB1 TNPA6413AD MAIN P.C.B 82EBK,... - Page 76 Safety Ref. No. Part No. Part Name & Qty Remarks Safety Ref. No. Part No. Part Name & Qty Remarks Description Description IC5802 C0DAAYY00072 L5702 G0B103G00023 INDUCTOR L5801 G0A330ZA0045 INDUCTOR CAPACITORS TRANSISTORS C2902 F1H1H103B047 0.01uF C2903 F1H1H682B047 6800pF Q5701 B1CERT000009 TRANSISTOR C2905 F2A1H101A147...
- Page 77 Safety Ref. No. Part No. Part Name & Qty Remarks Safety Ref. No. Part No. Part Name & Qty Remarks Description Description R5816 D0GD152JA052 1.5K 1/8W CN9200 K1MY19AA0267 19P CONNECTOR R5817 D0GB223JA065 1/10W CN9202 K1KY06B00021 6P CONNECTOR R5818 D0GB152JA065 1.5K 1/10W R5819 D0GB102JA065...
- Page 78 Safety Ref. No. Part No. Part Name & Qty Remarks Safety Ref. No. Part No. Part Name & Qty Remarks Description Description R9305 D0GD3R3JA052 1/8W PCB8 REP4945B CD INTERFACE P.C.B R9306 D0GF390JA048 1/4W R9307 D0GF390JA048 1/4W SWITCHES R9308 D0GB101JA065 1/10W R9309 D0GB101JA065 1/10W...
- Page 79 Safety Ref. No. Part No. Part Name & Qty Remarks Description K4AK01Z00002 CONNECTORS K1MN10AA0046 10P CONNECTOR RESISTORS D0GA330JA023 1/16W D0GA330JA023 1/16W D0GA330JA023 1/16W D0GA101JA023 1/16W D0GA103JA023 1/16W D0GA201JA023 1/16W D0GA101JA023 1/16W D0GA101JA023 1/16W D0GAR00J0008 1/16W D0GAR00J0008 1/16W D0GA100JA023 1/16W D0GA100JA023 1/16W D0GAR00J0008 1/16W...