Advertisement
· Important Safety Instructions
1. To prevent electric shock, please ensure that all devices are properly g
rounded.
2. Do not place this device near or over a radiator or heat register, or where
it is exposed to direct sunlight.
3. Place the device in a well-ventilated area, do not block any ventilation
openings.
4. Do not expose this device to rain or place it near water. Any liquid that goes
into the device may cause a failure, fire, or electric shock.
5. Do not place the device on an uneven or unstable surface. The device may
fall resulting in a malfunction.
6. Never insert anything metallic into the open parts of this device. This may
cause a danger of electric shock.
7. The device should be repaired only by a qualified technician.
8. If a third-party power supply is used, please ensure that the power supply
specifications meet the product requirements.
· Introduction
This is a 4-in-1-out ultra-high-definition KVM extender switch, comprises a
transmitting end and a receiving end. It supports 4 HDMI signal inputs and 1
HDMI signal output, the 4K@60Hz HDMI signal can be extended to 70 meters
through CAT6 or above network cable, the highest resolution is 4K@60Hz and
is backward compatible, supports KVM control. A variety of control methods
(IR remote control, button and RS-232) can easily switch the content of the 4
HDMI signal sources to the display. The product is widely used in security
monitoring, education and training, exhibitions and broadcasting, command
centers, etc.
2
Advertisement
