Advertisement
Quick Links
6. RFQ
Q1: No image output?
A1: Check the led indicator status to make sure all connections are
good and stable.
Q2: Signal led "3" is flashing but no image output?
A2:Check if the HDMI display device has been switched to the right
HDMI input channel.
Q3: Signal led "2" is flashing but "3" light is off?
A3: Check whether the TX' HDMI IN has signal input and make sure
RX's HDMI OUT is well connected with HDMI display .
Q4: Output image has flashing points or disturbance points?
A4: Change TX' HDMI signal input cable or use shorter HDMI cable.
7. SPECIFICATION
Specifications
Items
Power supply
4KX2K, compatible with HDCP; support CEC
HDMI signal
and 24bits deep color
resolution Supported
Network cable
Transmission length
Support 20~60kHz wide frequency devices and
Infrared back
Bi-directional IR transmission
Power consumption
Product dimension
HDBaseT HDMI Extender over single CAT 5/6/7
Note
2pcs
User's manual
Advertisement
Related Manuals for Lenkeng LKV375
Summary of Contents for Lenkeng LKV375
- Page 1 6. RFQ Q1: No image output? A1: Check the led indicator status to make sure all connections are HDBaseT HDMI Extender over single CAT 5/6/7 good and stable. User's manual Q2: Signal led “3” is flashing but no image output? A2:Check if the HDMI display device has been switched to the right HDMI input channel.
- Page 2 IMPORTANT SAFETY INSTRUCTIONS 3.2 HDBaseT to HDMI using adapters not supplied by factory. 1. PACKAGE CONTENTS DC5V: Power input HDBT IN: HDBaseT signal input HDMI OUT: HDMI signal output to connect with HDMI display device. IR IN: IR signal input to connect with IR receiver extension cable IR OUT: IR signal output to connect with IR blaster extension cable DC5V2A*2pcs HDBaseT to HDMI receiver...