⑤
DC 5V
Connect with DC5V/1A power adapter
⑥
HDMI input
Connect with HDMI source device
Connect to the computer's USB ports with USB
⑦
USB (Type-B)
cables
2. Receiver (RX)
① ②
⑦
⑧
①
Reset
Press the reset key to restart the device
② IR receiving window
Receive IR signal
Corresponding to HDMI input 1, 2, 3, 4
③
HDMI input indicator
respectively
Press the button to switch the input of the
④
Switch button
signal source
Light off: the keyboard/mouse and the USB
port have not established a connection
⑤
Steady on: the keyboard/mouse and the USB
KVM indicator (blue)
port are connected
Light flashing: the KVM data is transmitting
③
④
⑤
⑥
⑨
⑩
5
Light off: no power
Slow flash (every 1 second): there is power, but
no HDMI signal
Power/Signal indicator
⑥
Quick flash (every 200ms): the HDMI signal is
(orange)
connecting
Steady on: the HDMI signal is transmitting
⑦
DC 5V
Connect with DC5V/1A power adapter
⑧
RS-232
For RS-232 command control
⑨
RJ45 input
Connect with CAT6/6A/7 network cable
⑩
HDMI output
Connect with HDMI display device
USB(Type-A)
Connect with keyboard and mouse
Remote Control
"<" and ">" button, to choose channel forward or backward.
"1-4" number buttons, to choose any source device as you need
· Installation and Connection
1. How to make a network cable, follow the standard of IEEE-568B:
1-white and orange
2-orange
5-white and blue
6-green
3-white and green
4-blue
7-white and brown
8-brown
6