Download Print this page

Lenkeng LKV380 User Manual

Hdbitt hdmi extender over powerline

Advertisement

Quick Links

HDbitT HDMI Extender over Powerline
Thank you for purchasing this product. For optimum performance and
safety, please read the instructions carefully and keep the manual for
future reference.
User manual
• Important safety notice
Please read below safety instructions carefully before installation and
operation:
1. Please pay attention to all the warnings and hints on this device.
2. Do not expose this unit to rain, moisture and liquid.
3. Do not put any stuff into the device.
4. Do not repaire the device or open the enclosure without professional
person guidence to avoid electronic shock.
5. Make sure good ventilation openings to avoid product overheating
damage.
6. Shut off power and make sure environment is safe before installation.
7. Do not plug-in/out the network cables and IR cables when it is in
using to avoid cables damage.
8. Make sure the specification matched if using 3
• Introduction
This HDMI powerline extender applies the HDBitT transmission protocol
and transmits audio and video signal over existing power line. It does not
require any cabling. Under the same electric meter, it just needs to connect
transmitter and receiver .Power them on and they can match automatically.
Plug and play design gives users very convenient and portable connection.
• Features
1. It use powerline to transmit signal, and can be connected where there
is outlet, eliminating the wiring of network cable or HDMI Cable.
2. Input voltage: AC 100~240V.
3. It can extends 1080P@60Hz signal up to 300M under the condition
of fluent electric power environment.
4. It supports IR pass back .
5. Supports HDMI loop output from TX
6. Fireproof raw material is used to ensure safety and reliability.
7. Easy setup, plug and play.
• Package contents
HDMI Extender TX
sender*1pcs
rd
party DC adapters.
IR blaster extension
cable*1pcs
• Installation Requirement
1. HDMI source device (DVD, PS3, Set top box, PC etc).
2. HDMI display device like SDTV, HDTV, and projector with HDMI port.
3. AC 100~240V Power input.
• Panel description
HDMI Extender RX
AC 100-240V
receiver*1pcs
power line*2pcs
IR receiver extension
User manual*1pcs
cable*1pcs

Advertisement

loading

Summary of Contents for Lenkeng LKV380

  • Page 1 • Features Thank you for purchasing this product. For optimum performance and 1. It use powerline to transmit signal, and can be connected where there safety, please read the instructions carefully and keep the manual for is outlet, eliminating the wiring of network cable or HDMI Cable. future reference.
  • Page 2 • Connection 1. HDMI Extender TX sender 2) Please check if the powerline capacity is over loaded 3) Please check if there is electricity interruption equipment. And it is advised to plug in wall outlet and avoid using power charger and WARNING LAYPEOPLE IS FORBIDDEN TO OPEN IT power adapter.